The Thanks Thread - UK Vintage Radio Repair and Restoration Discussion Forum

oldticktock · 25th Oct 2010, 8:17 pm

Just thought I would like to say a big thank you to forum member GrimJosef.

A silent stalwart of the FCS who has for the second time this year helped me along with many others, with many items.

His car is always bulging to the brim, also an even bigger thank you to Mrs GrimJosef for putting up with all the diversions and a car full of smelly old Tellys

GJ is a modest chap and I hope he does not mind public praise, for without the efforts of people like GJ and other FCS helpers where would we all be. So I raise my

to you GJ and all the other unsung helpers who support this excellent community service many thanks

Kind regards
Chris

Mikeymushradio · 25th Oct 2010, 9:04 pm

Seconded! Many thanks from me GJ.

Mike

PJL · 26th Oct 2010, 8:13 am

GJ, I can't thank you enough for the transport of the RA17L and delivering it to the doorstep is beyond generosity.

I hope I can return the favour some time.

Damo666 · 27th Oct 2010, 7:56 am

@Moderators; Would you be so kind as to allow a sticky thread indicating thanks to the selfless members here that trade/bend over backwards to assist persons like myself here?
In my opinion it'd be a great addition to the already wonderful forum.
I've got numerous people that i'd like to thank, hence the post.
All the best,
Damian.

Tim · 27th Oct 2010, 10:25 am

Seconded

dallaslaff · 27th Oct 2010, 10:37 am

Hi, I agree with the point about the selfless help and advice given out by members of this forum, it is indeed praiseworthy. But, I think each thread can be ended with a thank you to the contributors, who are the people most likely to be following it. I'm a sad git who reads all of the threads/posts, even if they are outside of my interest area, a lot of people only browse specific topics. I just wonder who would look at this thread to find out who's thanking who and for what.
Just my two pen'orth.
Les

MichaelR · 27th Oct 2010, 10:43 am

Some forum software packages have a means for a member to send a thank you acknowledgement to another member. The acknowledgement appears in the area where the receiver's Avatar is displayed.

Regards,
Mike

Damo666 · 27th Oct 2010, 10:44 am

Further to my post; I'd like to announce my thanks and gratitude to the following members; Richard, thanks for the honest and swift transaction re' my request on the wanted section. And finally - Jason Pero, for instructing me re' the tool I require for aligning a component in the Vintage amateur radio sub forum.
Without Jasons assistance, i'd still be stuck on square one.
All the best,
Damian.

oldticktock · 13th May 2011, 7:36 pm

Just wanted to say thanks to a whole raft of people who have provide all sorts of assistance be it with technical help, tracking and providing elusive items, data, equipment transports and general words of encouragement and even the odd kick in the pants when needed.

I won't name you all, you know who your are and how you have helped, my heart felt thanks go out to you all, a great community.

I hope to follow by your example.

Chris.

HamishBoxer · 16th May 2011, 10:56 am

My Thanks go to Jeremy and Chris for arranging collection/delivery at the NVCF on Sunday.

Regards David

MALC SCOTT · 26th May 2011, 9:01 pm

Big thanks to David Boynes (FERNSEH) for collecting a huge 25 inch Ferguson dual standard ctv for me from the NVCF.

60 oldjohn · 26th May 2011, 11:41 pm

I would like to say a big thank you to Trevor and Dave moll for transporting the JVC videosphere for me to collect at the NVCF. Thanks again John.

GrimJosef · 8th Jun 2011, 9:51 pm

Just to say a public "thank you" to Doug_h for the TCC PIO capacitors which he gave away in this thread https://www.vintage-radio.net/forum/...ad.php?t=70217 (now closed) and which I picked up today. I'm already matching some of them to projects I have in mind

!

Cheers,

GJ

davidw · 9th Jun 2011, 10:43 am

A BIG thankyou to Peter (Chaparel) in Germany who has kindly sent me the details I needed re my signal generator. Thanks Peter.

gezza123 · 11th Jun 2011, 10:44 am

Hi,

I Wish to say a big thanks for the speedy supply of some valves from Pamphonica/Jeremy and the excellent service that he provides.

Thank you Jeremy.

HamishBoxer · 14th Jun 2011, 10:42 am

Think thanked one member already via PM, but thank you Trevor for getting the A34 to yours. Will certainly get it moved Sat.

Regards,
David

Station X · 15th Jun 2011, 8:05 pm

Thanks to Craig TriMan66 for transporting two radios from Durham to Cambridgeshire.

I understand that Craig has two other radios from the same source for forum members.

Cobaltblue · 5th Jul 2011, 9:25 pm

A few months ago Angela offered some speakers on the Forum see here
I am please to say that these proved very popular at the Wotton Bassett meeting on the Bring and Buy.
Many a set will have a nice replacement speaker through her generosity.

around £30 has been donated to the museum to date. The exact figure is unknown as some donations made directly to Museum.
I think everyone would like to thank Angela and all those who made donations.
Have Fun

Mike T

G4XWDJim · 6th Jul 2011, 6:02 pm

I think I should publicly thank Tuning Indicator for selecting me as the winner of the Bakelite Polish Raffle.

It's the first raffle I've ever won and I was a bit slow in noticing that I was the winner. So slow in fact that the thread was closed before my very eyes, hence my entry here.

Thanks again, it'll come in very handy with a grotty Phillips I must make a start on.

Jim

TuningIndicator · 6th Jul 2011, 9:22 pm

Very kind of you, to mention me in despatches.
Happy polishing!

25th Oct 2010, 8:17 pm	#1
oldticktock Retired Dormant Member Join Date: Nov 2009 Location: Weardale, UK. Posts: 1,981	The Thanks Thread Just thought I would like to say a big thank you to forum member GrimJosef. A silent stalwart of the FCS who has for the second time this year helped me along with many others, with many items. His car is always bulging to the brim, also an even bigger thank you to Mrs GrimJosef for putting up with all the diversions and a car full of smelly old Tellys GJ is a modest chap and I hope he does not mind public praise, for without the efforts of people like GJ and other FCS helpers where would we all be. So I raise my to you GJ and all the other unsung helpers who support this excellent community service many thanks Kind regards Chris

25th Oct 2010, 9:04 pm	#2
Mikeymushradio Rest in Peace Join Date: Jun 2003 Location: Newcastle, Tyne and Wear, UK. Posts: 188	Re: The Thanks thread. Seconded! Many thanks from me GJ. Mike

26th Oct 2010, 8:13 am	#3
PJL Dekatron Join Date: Sep 2005 Location: Seaford, East Sussex, UK. Posts: 5,905	Re: The Thanks thread. GJ, I can't thank you enough for the transport of the RA17L and delivering it to the doorstep is beyond generosity. I hope I can return the favour some time.

27th Oct 2010, 7:56 am	#4
Damo666 Hexode Join Date: Jan 2010 Location: Blackburn, Lancashire, UK. Posts: 367	Re: The Thanks thread. @Moderators; Would you be so kind as to allow a sticky thread indicating thanks to the selfless members here that trade/bend over backwards to assist persons like myself here? In my opinion it'd be a great addition to the already wonderful forum. I've got numerous people that i'd like to thank, hence the post. All the best, Damian.

27th Oct 2010, 10:25 am	#5
Tim Dekatron Join Date: Jan 2003 Location: Bradford on Avon, Wiltshire, UK. Posts: 3,264	Re: The Thanks thread. Seconded __________________ "Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly."

27th Oct 2010, 10:37 am	#6
dallaslaff Pentode Join Date: Jul 2008 Location: Sutton Coldfield, West Midlands, UK. Posts: 141	Re: The Thanks thread. Hi, I agree with the point about the selfless help and advice given out by members of this forum, it is indeed praiseworthy. But, I think each thread can be ended with a thank you to the contributors, who are the people most likely to be following it. I'm a sad git who reads all of the threads/posts, even if they are outside of my interest area, a lot of people only browse specific topics. I just wonder who would look at this thread to find out who's thanking who and for what. Just my two pen'orth. Les

27th Oct 2010, 10:43 am	#7
MichaelR Retired Dormant Member Join Date: Mar 2006 Location: Sheffield, South Yorkshire, UK. Posts: 1,587	Re: The Thanks thread. Some forum software packages have a means for a member to send a thank you acknowledgement to another member. The acknowledgement appears in the area where the receiver's Avatar is displayed. Regards, Mike Last edited by MichaelR; 27th Oct 2010 at 10:45 am. Reason: spelling

27th Oct 2010, 10:44 am	#8
Damo666 Hexode Join Date: Jan 2010 Location: Blackburn, Lancashire, UK. Posts: 367	Re: The Thanks thread. Further to my post; I'd like to announce my thanks and gratitude to the following members; Richard, thanks for the honest and swift transaction re' my request on the wanted section. And finally - Jason Pero, for instructing me re' the tool I require for aligning a component in the Vintage amateur radio sub forum. Without Jasons assistance, i'd still be stuck on square one. All the best, Damian.

13th May 2011, 7:36 pm	#9
oldticktock Retired Dormant Member Join Date: Nov 2009 Location: Weardale, UK. Posts: 1,981	Re: The Thanks thread. Just wanted to say thanks to a whole raft of people who have provide all sorts of assistance be it with technical help, tracking and providing elusive items, data, equipment transports and general words of encouragement and even the odd kick in the pants when needed. I won't name you all, you know who your are and how you have helped, my heart felt thanks go out to you all, a great community. I hope to follow by your example. Chris.

16th May 2011, 10:56 am	#10
HamishBoxer Dekatron Join Date: Aug 2007 Location: W.Butterwick, near Doncaster UK. Posts: 8,854	Re: The Thanks thread. My Thanks go to Jeremy and Chris for arranging collection/delivery at the NVCF on Sunday. Regards David

26th May 2011, 9:01 pm	#11
MALC SCOTT Octode Join Date: Aug 2006 Location: Willington, County Durham, UK. Posts: 1,493	Re: The Thanks thread. Big thanks to David Boynes (FERNSEH) for collecting a huge 25 inch Ferguson dual standard ctv for me from the NVCF. __________________ Malc Scott

26th May 2011, 11:41 pm	#12
60 oldjohn Dekatron Join Date: Dec 2004 Location: East Yorkshire, UK. Posts: 3,732	Re: The Thanks thread. I would like to say a big thank you to Trevor and Dave moll for transporting the JVC videosphere for me to collect at the NVCF. Thanks again John.

8th Jun 2011, 9:51 pm	#13
GrimJosef Dekatron Join Date: Sep 2007 Location: Oxfordshire, UK. Posts: 4,257	Re: The Thanks thread. Just to say a public "thank you" to Doug_h for the TCC PIO capacitors which he gave away in this thread https://www.vintage-radio.net/forum/...ad.php?t=70217 (now closed) and which I picked up today. I'm already matching some of them to projects I have in mind ! Cheers, GJ

9th Jun 2011, 10:43 am	#14
davidw Heptode Join Date: Sep 2006 Location: Woodbridge, Suffolk, UK. Posts: 630	Re: The Thanks thread. A BIG thankyou to Peter (Chaparel) in Germany who has kindly sent me the details I needed re my signal generator. Thanks Peter. __________________ Dave G1AGK. My perception is my reality!

11th Jun 2011, 10:44 am	#15
gezza123 Heptode Join Date: Mar 2010 Location: Eastham, Wirral, Merseyside, UK. Posts: 781	Re: The Thanks thread. Hi, I Wish to say a big thanks for the speedy supply of some valves from Pamphonica/Jeremy and the excellent service that he provides. Thank you Jeremy.

14th Jun 2011, 10:42 am	#16
HamishBoxer Dekatron Join Date: Aug 2007 Location: W.Butterwick, near Doncaster UK. Posts: 8,854	Re: The Thanks thread. Think thanked one member already via PM, but thank you Trevor for getting the A34 to yours. Will certainly get it moved Sat. Regards, David

15th Jun 2011, 8:05 pm	#17
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 20,462	Re: The Thanks thread. Thanks to Craig TriMan66 for transporting two radios from Durham to Cambridgeshire. I understand that Craig has two other radios from the same source for forum members. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.

5th Jul 2011, 9:25 pm	#18
Cobaltblue Moderator Join Date: Dec 2010 Location: Exeter, Devon and Poole, Dorset UK. Posts: 6,502	Speaker Generosity at WB A few months ago Angela offered some speakers on the Forum see here I am please to say that these proved very popular at the Wotton Bassett meeting on the Bring and Buy. Many a set will have a nice replacement speaker through her generosity. around £30 has been donated to the museum to date. The exact figure is unknown as some donations made directly to Museum. I think everyone would like to thank Angela and all those who made donations. Have Fun Mike T __________________ Don't care if it was a bargain why's it in my kitchen Mike T BVWS member. www.cossor.co.uk

6th Jul 2011, 6:02 pm	#19
G4XWDJim Octode Join Date: Oct 2008 Location: Littlehampton, West Sussex, UK. Posts: 1,461	Re: The Thanks thread. I think I should publicly thank Tuning Indicator for selecting me as the winner of the Bakelite Polish Raffle. It's the first raffle I've ever won and I was a bit slow in noticing that I was the winner. So slow in fact that the thread was closed before my very eyes, hence my entry here. Thanks again, it'll come in very handy with a grotty Phillips I must make a start on. Jim

6th Jul 2011, 9:22 pm	#20
TuningIndicator Retired Dormant Member Join Date: Aug 2010 Location: Sussex, UK. Posts: 161	Re: The Thanks thread. Very kind of you, to mention me in despatches. Happy polishing!