UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment


Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
Thread Tools
Old 14th Jan 2019, 10:16 pm   #1
Posts: n/a
Default STL file to print in 3D black and red caps for AVO.

So, here you are, for every Avo lovers the STL file to print the black and red caps.

They are very well done, note that the diameter of the red one is bigger than the black one, so there are 2 different STL.

I wrote a few days ago to a Moderator, who kindly said to me that on the sticky thread "Avo model 8 FAQ" will be a link to this new thread with the files.

These caps were made with love and care for the Avo Community people, not for selling them or to earn money, so please do not try to sell the caps or the files to others.

I hope you enjoy them.

Aitor Eneko.
Attached Files
File Type: zip Black cap by (184.0 KB, 142 views)
File Type: zip Red cap by (188.5 KB, 104 views)

Last edited by Guest; 14th Jan 2019 at 10:26 pm.
Old 14th Jan 2019, 11:47 pm   #2
Cathode Ray
Cathode Ray's Avatar
Join Date: Dec 2018
Location: County Meath, Ireland
Posts: 242
Default Re: Stl to print in 3d black and red cap for avo

Nice one Aitor,
I will also upload my version which is slightly different, but its surprising how close we are.
I have also created an Ohms zero knob if anyone needs one.

And finally, the surfaces can be smoothed out by using acitone vapor.
Good video here on how to do it simply.

I have yet to do this but I'm going try it soon.


Attached Files
File Type: zip Avo cap by (280.4 KB, 92 views)
File Type: zip Avo zero knob by (916.7 KB, 101 views)
Cathode Ray is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 11:04 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.