UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
 
Thread Tools
Old 22nd Nov 2017, 4:06 am   #1
John Earland
Triode
 
Join Date: May 2013
Location: Middlesbrough, North Yorkshire, UK.
Posts: 33
Default 332 handset connection

Hi, I have an old 332 phone and I want to remove the non original dial and simply put a blanking plate in. I’d like to use the phone as an extension without a dial. Howver, can anyone help me but suggesting how I can wire up the handset to the chassis because I won’t be connecting it to the dial?
Many thanks
John
John Earland is offline  
Old 22nd Nov 2017, 6:11 am   #2
TonyDuell
Nonode
 
Join Date: Jun 2015
Location: Biggin Hill, London, UK.
Posts: 2,584
Default Re: 332 handset connection

As far as I know the handset wiring (and the line wiring) remains unchanged. You remove the dial and the dial harness (from the terminal strip on the top of the chassis) and link terminals 4 and 5 of that terminal strip to complete the circuit now that the impulse contacts of the dial are no longer there.
TonyDuell is online now  
Old 24th Nov 2017, 12:31 am   #3
John Earland
Triode
 
Join Date: May 2013
Location: Middlesbrough, North Yorkshire, UK.
Posts: 33
Default Re: 332 handset connection

Thank you for that Tony-I’ll give it a try.
Thank you.
John
John Earland is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 5:25 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.