UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 9th Jun 2018, 9:29 pm   #21
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

Hi John, the B7G plug will be gratefully received.

It's a very easy task to remove the chassis from the cabinet. Disconnect the loudspeaker leads, the five control panel plugs on the left side of the chassis, remove the two 2BA hex head chassis securing screws and withdraw the chassis complete with the CRT.

Only one waxie found in the frame timebase, C96, a 0.2mfd TCC component - and it's leaky. The cathode bias capacitor C97 500mfd is OK but the PCL85 screen grid decoupler C98 might be suspect.
Lots of black tubular Hunts capacitors to check for leaks.
The attachment shows the circuit diagram of the model DR39.

DFWB.
Attached Thumbnails
Click image for larger version

Name:	DeccaDR101FTB.jpg
Views:	60
Size:	106.7 KB
ID:	164328  
FERNSEH is offline   Reply With Quote
Old 13th Jun 2018, 3:33 pm   #22
Focus Diode
Octode
 
Focus Diode's Avatar
 
Join Date: Jan 2006
Location: Borough of Gateshead, UK.
Posts: 1,241
Default Re: Decca DR101 dual standard TV

A little work did wonders for the performance of the set. Note how the chassis comes out complete with CRT. Bit hazardous if children were around if serviced in the home I would have thought.

The components are beautifully laid out with each component relatively easy to get to.

Much work still to do. The CRT is as good as new.

Photos taken with David's kind permission..

What a cracking set!

Cheers
Brian
Attached Thumbnails
Click image for larger version

Name:	IMG_20180613_151956.jpg
Views:	137
Size:	154.2 KB
ID:	164517   Click image for larger version

Name:	IMG_20180613_151914.jpg
Views:	132
Size:	132.4 KB
ID:	164518   Click image for larger version

Name:	IMG_20180613_152044.jpg
Views:	146
Size:	62.4 KB
ID:	164519   Click image for larger version

Name:	IMG_20180613_152122.jpg
Views:	127
Size:	124.8 KB
ID:	164520   Click image for larger version

Name:	IMG_20180613_153009.jpg
Views:	115
Size:	63.3 KB
ID:	164521  

Focus Diode is offline   Reply With Quote
Old 13th Jun 2018, 7:58 pm   #23
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

Thanks to Brian for posting up the pictures. Still work to do on this set before it can be signed off. The width control doesn't work, it's likely the coupling capacitor between the line oscillator and the grid of the PL36 has a leak. The Decca has a stabilised line output stage which employs a VDR as the device to rectify the flyback pulse to produce the controlling negative bias for the line output valve.

The picture needs more height, it's likely more capacitors need replacing. The vision AGC isn't working properly and again it'll be those Hunts capacitors.
Switching over to 625 lines is facilitated by selecting the "UHF" position on the VHF tuner, except it doesn't, that's something else to look into.

DFWB.

Last edited by FERNSEH; 13th Jun 2018 at 8:06 pm.
FERNSEH is offline   Reply With Quote
Old 17th Jun 2018, 7:13 pm   #24
Pieter H
Triode
 
Join Date: Sep 2017
Location: Waalre, Netherlands
Posts: 34
Default Re: Decca DR101 dual standard TV

Hi David,
that look like Philips tuners in the Decca set.
If so could you make a close-up picture and/or tell what is written on the labels?

Cheers, Pieter
Pieter H is offline   Reply With Quote
Old 17th Jun 2018, 9:36 pm   #25
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

Hi Pieter,
The VHF tuner is a Philips AT7639/22. When the control panel is removed we'll find out the type of UHF tuner, it is a Philips, that's for sure.

John HKS has kindly donated a B7G plug to replace the burnt out one.
The set does work well on 625 lines UHF but there is a problem with the standards switch solenoids.

DFWB.
FERNSEH is offline   Reply With Quote
Old 18th Jun 2018, 9:55 pm   #26
Pieter H
Triode
 
Join Date: Sep 2017
Location: Waalre, Netherlands
Posts: 34
Default Re: Decca DR101 dual standard TV

Hi David,
thanks. The UHF tuner will then likely be the AT6360/02 (PC88 and PC86), but let's see. Would be great if you can find the 12nc codes on the labels too.

Pieter
Pieter H is offline   Reply With Quote
Old 20th Jun 2018, 3:38 pm   #27
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

Pictures of the VHF and UHF tuners, both sourced from Philips. The VHF tuner has a cam at the rear to actuate the standards switch solenoids.
The label might help to identify the country of manufacture.
The UHF tuner has no identifying labels but it's safe to assume it was made by Philips.
I'll take look at the Tuners in the Decca DR123.
The decoupling capacitors in the vision AGC circuits had leaks, particularly the two parallel connected 0.5mfd capacitors which were reading 500Kohms on the Simpson 260 multimeter.

DFWB.
Attached Thumbnails
Click image for larger version

Name:	DeccaDR101_3.jpg.jpg
Views:	70
Size:	91.4 KB
ID:	164929   Click image for larger version

Name:	DeccaDR101_4.jpg
Views:	66
Size:	88.3 KB
ID:	164930   Click image for larger version

Name:	DeccaDR101_5.jpg
Views:	64
Size:	83.5 KB
ID:	164931   Click image for larger version

Name:	DeccaDR101_6.jpg
Views:	64
Size:	70.5 KB
ID:	164932  
FERNSEH is offline   Reply With Quote
Old 20th Jun 2018, 5:01 pm   #28
Focus Diode
Octode
 
Focus Diode's Avatar
 
Join Date: Jan 2006
Location: Borough of Gateshead, UK.
Posts: 1,241
Default Re: Decca DR101 dual standard TV

A thought about the solenoid. I guess it'll be fused?
Some sets, notably Thorn fitted a fusible resistor. Philips used a fuse.

Don't know about Decca though.
Focus Diode is offline   Reply With Quote
Old 20th Jun 2018, 8:15 pm   #29
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

Hi Brian,
The Decca DR101 employs the two series connected smoothing chokes as the system switch solenoid. There is no DC passing through the switches, instead, the charge on C65 actuates the switching function. It's most likely that a leak in C65 is the reason why the system switch doesn't work properly.

The circuit diagram extract is from the information in the 1963/64 R & T servicing book for the Decca DR31.

DFWB.
Attached Thumbnails
Click image for larger version

Name:	DeccaDR101_SystemSwitch.jpg
Views:	45
Size:	173.9 KB
ID:	164951  

Last edited by FERNSEH; 20th Jun 2018 at 8:23 pm.
FERNSEH is offline   Reply With Quote
Old 21st Jun 2018, 1:50 pm   #30
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 562
Default Re: Decca DR101 dual standard TV

Hi David,
that Philips VHF tuner looks like the ones that were used in the STC sets (KB etc.) which had the advantage of remembering the fine tuning setting for each of the VHF channels.

Do let me know if you need any solenoids rewound.

Cheers
Andy
beery is offline   Reply With Quote
Old 21st Jun 2018, 3:48 pm   #31
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

Hi Andy,
I've been tracing the system switch circuits and there are differences in the DR101 compared with switching circuits in the DR31. For starters there are no connections to the system switches SW3 and 6 from pins 6 and 7 of the B9A plug.
Also, the 0.25uF capacitor C65 can't be found.

In the DR101 pin 7 of the B9A plug goes direct to the HT reservoir capacitor C64 and pin 6 goes direct to the HT smoother C66. Pin 2 of the B7G plug goes to a 600 ohm 5watt resistor which must supply one of the sub-HT lines in the receiver.
A full service manual is needed for this set.

Now the set is stuck on 625 lines. I can report the set works very well on 625.

DFWB.
FERNSEH is offline   Reply With Quote
Old 21st Jun 2018, 8:28 pm   #32
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 4,997
Default Re: Decca DR101 dual standard TV

The attachment shows the twin smoothing chokes which also function as solenoids to actuate the system switch lever.

DFWB.
Attached Thumbnails
Click image for larger version

Name:	DeccaDR101_8.jpg
Views:	49
Size:	120.2 KB
ID:	164999  
FERNSEH is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 7:09 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.