Phono Stage Recommendations - Page 6 - UK Vintage Radio Repair and Restoration Discussion Forum

21st Oct 2020, 4:40 pm

Quote:

as a crude but effective High pass filter

Not crude at all, maybe not what is wanted but perfectly definable. Simple it is, as Audiophools like simple, wonderful!

gramophone1 · 22nd Oct 2020, 2:33 pm

The turntable is an audio technica direct drive type. The cause of the rumble is from defects in the vinyl. It is sitting on a standard glass shelf hifi stand, and glass rings like a bell. So I placed a wooden board under the turntable, which has stopped the ringing. This has also reduced the rumble as well, which is a bonus.

I am just not going to worry about it. The rumble only happens when I play certain records. It is a defect of the manufacturing process.

Radio Wrangler · 22nd Oct 2020, 10:26 pm

This thread seems to have run out of RIAA stage suggestions and settled into a discussion of rumble. So, as a fellow moderator would put it, it's time for the leadout groove.

David

22nd Oct 2020, 2:33 pm	#102
gramophone1 Pentode Join Date: Apr 2018 Location: Tyne and Wear, UK. Posts: 168	Re: Phono Stage Recommendations The turntable is an audio technica direct drive type. The cause of the rumble is from defects in the vinyl. It is sitting on a standard glass shelf hifi stand, and glass rings like a bell. So I placed a wooden board under the turntable, which has stopped the ringing. This has also reduced the rumble as well, which is a bonus. I am just not going to worry about it. The rumble only happens when I play certain records. It is a defect of the manufacturing process. Last edited by gramophone1; 22nd Oct 2020 at 2:54 pm.

22nd Oct 2020, 10:26 pm	#103
Radio Wrangler Moderator Join Date: Mar 2012 Location: Fife, Scotland, UK. Posts: 22,880	Re: Phono Stage Recommendations This thread seems to have run out of RIAA stage suggestions and settled into a discussion of rumble. So, as a fellow moderator would put it, it's time for the leadout groove. David __________________ Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done