|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
17th Sep 2022, 1:58 pm | #1 |
Dekatron
Join Date: Sep 2006
Location: Kilmarnock, Ayrshire, UK.
Posts: 5,422
|
Advance EHT & 6.3v PSU front panel
Hi
I've recently acquired the above in rather poor condition, internally its pretty well perfect, the variable EHT control was seized but after dismantling the nylon bush needed to be carefully reamed, after lubrication all is well, also a 1M resistor was open circuit to the EHT meter. My problem is the front panel, it's quite badly rusted, I don't even know the model number, information would be useful and even a scan of the front panel. I couldn't find any info online. Photo is after respraying the case.
__________________
Cheers, Trevor. MM0KJJ. RSGB, GQRP, WACRAL, K&LARC. Member |
17th Sep 2022, 2:26 pm | #2 |
Nonode
Join Date: Jan 2010
Location: Edinburgh, UK.
Posts: 2,008
|
Re: Advance EHT & 6.3v PSU front panel
These people are ex Advance and Farnell PSU design engineers.
If nothing else they might be able to give you a model number. Al Edit: It would be helpful if I had posted the link! Doh. https://advanceproductservices.co.uk...-repair-list/#
__________________
I won't tell you how I discovered that. |
17th Sep 2022, 3:33 pm | #3 |
Heptode
Join Date: Apr 2003
Location: Ayr, Ayrshire, UK.
Posts: 631
|
Re: Advance EHT & 6.3v PSU front panel
Hi Trevor,
I thought it was a PP-12 (check back panel...) Andy
__________________
G-QRP #12697 |
17th Sep 2022, 3:55 pm | #4 |
Dekatron
Join Date: Sep 2006
Location: Kilmarnock, Ayrshire, UK.
Posts: 5,422
|
Re: Advance EHT & 6.3v PSU front panel
Indeed it is a PP12, thanks Andy.
Never gave the back panel a second look.... Oh dear. Anyway I still need a scan or a front panel. Thanks Al for the info and link.
__________________
Cheers, Trevor. MM0KJJ. RSGB, GQRP, WACRAL, K&LARC. Member |