UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms


Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
Thread Tools
Old 29th Apr 2009, 7:54 pm   #1
Pete_kaye's Avatar
Join Date: Jun 2005
Location: Sheffield, South Yorkshire, UK.
Posts: 953
Default What glue to use on bakelite?Araldite?

I have a300 series black phone where the part where the dial screw attaches has broken away in two small pieces;what is a good glue to use to stick it together then back on again? It might still need buiding up as I think there is a piece missing .Rest of case is very good
Pete_kaye is offline  
Old 29th Apr 2009, 9:28 pm   #2
Tim's Avatar
Join Date: Jan 2003
Location: Bradford on Avon, Wiltshire, UK.
Posts: 2,688
Default Re: What glue to use on bakelite?Araldite?

Araldite or Superglue will be fine.
B&Q's own brand epoxy is transparent, and available in quick(hours) or standard(24 hours) forms.
Other brands are available.................
"Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly."
Tim is online now  
Old 29th Apr 2009, 9:47 pm   #3
Nickthedentist's Avatar
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 14,229
Default Re: What glue to use on bakelite?Araldite?

See here:
Nickthedentist is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 11:52 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.