UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Reply
 
Thread Tools
Old 29th May 2019, 3:08 pm   #1
Steve G4WCS
Pentode
 
Steve G4WCS's Avatar
 
Join Date: Sep 2004
Location: Preston, Lancashire, UK.
Posts: 223
Default Ten Tec 6-2M transverter

Managed to pick up this transverter. Built from a kit.
On the whole it seems well designed, uses a discrete mixer and pin diode switching.

It looks to have had a final transistor replaced and a couple of addintional leds cobbled On.
Plenty ferrites in there.

Need a suitably vintage prime mover now. Happy days
Attached Thumbnails
Click image for larger version

Name:	CD1F14C8-3C65-4248-9ABB-21096A14F23E.jpg
Views:	83
Size:	89.4 KB
ID:	184129   Click image for larger version

Name:	194F68AD-6F95-4D55-9119-657D6D16621B.jpg
Views:	87
Size:	136.7 KB
ID:	184130   Click image for larger version

Name:	551E1F7D-6E8A-404C-9A41-800B7FC82880.jpg
Views:	84
Size:	56.9 KB
ID:	184131   Click image for larger version

Name:	68A166EB-419C-4477-B4D0-A1FE88175521.jpg
Views:	73
Size:	60.7 KB
ID:	184132  
Steve G4WCS is offline   Reply With Quote
Old 29th May 2019, 4:38 pm   #2
Jon_G4MDC
Heptode
 
Jon_G4MDC's Avatar
 
Join Date: Nov 2015
Location: Welwyn Garden City, Hertfordshire, UK.
Posts: 574
Default Re: Ten Tec 6-2M transverter

If those PA transistors ever need replacing you will have a hard job Steve.
What has been out there for last 10 years are almost all 100% fakes.
Hope yours are good.
Jon_G4MDC is online now   Reply With Quote
Old 4th Jun 2019, 3:08 pm   #3
Steve G4WCS
Pentode
 
Steve G4WCS's Avatar
 
Join Date: Sep 2004
Location: Preston, Lancashire, UK.
Posts: 223
Default Re: Ten Tec 6-2M transverter

Tested and working. Input attenuator resistors are set for 5 watts so its putting 6 watts out on 50 with 1 watt input from the IC-260

https://youtu.be/aUchWYqVcb4

https://youtu.be/ELzPJ0y_EBg
Steve G4WCS is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 9:52 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.