|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
3rd Oct 2010, 2:28 pm | #1 |
Retired Dormant Member
Join Date: Oct 2006
Location: Stoke-on-Trent, Staffordshire, UK.
Posts: 128
|
Taylor 67A signal generator manual wanted
Hi all,
Does anyone have or know where I can get a copy of the manual for a Taylor 67A signal generator? Thanks! |
3rd Oct 2010, 3:59 pm | #2 |
Heptode
Join Date: Jun 2004
Location: Ilkley, West Yorkshire, UK.
Posts: 656
|
Re: Taylor 67A signal generator manual wanted
Fred, I have copies of the 66A and 68A if these are of any help?
__________________
Colin Armstrong |
3rd Oct 2010, 8:36 pm | #3 |
Retired Dormant Member
Join Date: Oct 2006
Location: Stoke-on-Trent, Staffordshire, UK.
Posts: 128
|
Re: Taylor 67A signal generator manual wanted
Hi Colin,
Thank you for replying, it may help. Looking at early sales literature the 67A and 68A appear very similar but the 68A has an additional control plus a meter so one assumes they may have similar circuits with the 67A being somewhere between the 66A and 68A. The valves used in the 67A are 2 x EC91. I am sending you a pm. Thanks again. |