|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
8th Sep 2016, 1:00 pm | #61 |
Pentode
Join Date: Feb 2015
Location: Conwy, Clwyd, UK.
Posts: 246
|
Re: Paint Stripping - "New" Nitromors is hopeless.
I sometimes use caustic soda mixed with wallpaper paste for stripping furniture. It darkens the wood although for the pine stuff I tend to do mainly the finish colour is alright ("antique" pine!)
Glyn |
8th Sep 2016, 5:30 pm | #62 |
Nonode
Join Date: Jan 2009
Location: Bristol, UK.
Posts: 2,059
|
Re: Paint Stripping - "New" Nitromors is hopeless.
I am always a bit surprised how easy it is to buy Sodium Hydroxide pellets. Personally I would use the stuff without a full face mask and within a few metres of a safety shower! In my days of handling dangerous chemicals this would score highly on the corrosive scale (somewhat below hydrofloric acid) as it is particularly good at blinding you
dc |
8th Sep 2016, 9:30 pm | #63 |
Dekatron
Join Date: Nov 2008
Location: Whittlesey, near Peterborough, Cambridgeshire, UK.
Posts: 3,758
|
Re: Paint Stripping - "New" Nitromors is hopeless.
Yes, they do use caustic soda, and if left in a bit too long. all the joints fall apart. Been there, done that!
Barry |
8th Sep 2016, 11:05 pm | #64 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,814
|
Re: Paint Stripping - "New" Nitromors is hopeless.
I once stripped a door in a large cellar using Caustic Soda. Of course it said use outdoors or in a well ventilated space. The large cellar had a big window but I still had to get out of there pretty fast once it got going. I took all my doors to a Trade Warehouse that had a large Caustic Tank in the end. I thought Caustic was the Industry Standard for this sort of thing but that was a long time ago. I've still got the heavy duty rubber gloves though. They eventually came in very handy when I had to move my distribution board quickly in an emergency, as it was subject to rainwater coming down the kitchen wall. I used to use Nitromors "Original" back then but even that took it's time!
Dave W Last edited by dave walsh; 8th Sep 2016 at 11:13 pm. |
9th Sep 2016, 10:27 am | #65 | |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,193
|
Re: Paint Stripping - "New" Nitromors is hopeless.
Quote:
Nowadays I use a hot air gun which resembles a hair dryer, but is a lot more powerful. It's much more convenient to use.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
|
10th Sep 2016, 3:41 pm | #66 |
Octode
Join Date: Jun 2011
Location: West Midlands, UK.
Posts: 1,571
|
Re: Paint Stripping - "New" Nitromors is hopeless.
The torch I use is a Taymar butane-propane canister type which is usually used for plumbing. It takes a bit of skill to avoid scorching the wood and thus I would not use it on a woody radio case or a piece of furniture. I have a Black & Decker hot air gun which was my father's (so probably on its way to vintage itself) and although it will do the job on household paintwork, and is safer, I find it harder work than the Taymar.
|
10th Sep 2016, 3:56 pm | #67 |
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,803
|
Re: Paint Stripping - "New" Nitromors is hopeless.
I too had a black and decker hot air paint stripper gun. It proved too wimpy to bother with.
Small items I just sand, for larger items it's a Calor Engineering torch David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |
10th Sep 2016, 5:11 pm | #68 |
Nonode
Join Date: Nov 2015
Location: Welwyn Garden City, Hertfordshire, UK.
Posts: 2,013
|
Re: Paint Stripping - "New" Nitromors is hopeless.
Pre-pack paraffin is expensive - you pay for it to be dyed pretty colours.
28sec heating oil isn't - it just might smell a bit more- maybe. If you are burning off paint you won't care about that? |
15th Sep 2016, 11:48 am | #69 |
Pentode
Join Date: Sep 2016
Location: Willerby, East Yorkshire, UK.
Posts: 191
|
Re: Paint Stripping - "New" Nitromors is hopeless.
Well I have tried allsorts. I have managed to make a paste up including caustic soda and gum and Fullers Earth ( main ingredient of kitty litter) but it's not a patch on the old formula Nitromors.
However, looking at the legislation (see attached) you can STILL buy stripper for removal of adhesives, which legally contains Methylene Chloride (DCM .... Dichloromethane) but it's illegal to sell it for use as paint stripper and illegal to use it for paint stripping by the end user without a license (see attached document). If you go to autojumbles like Newark or Rufforth (these are nearest me) you can buy 'Final Solutions' paint stripper at £7 /litre and 'Paramose stripper' at £20 for 5 litres (after haggling). See pic attached. They contain methylene chloride and I believe formic acid ( as in ant bites), so be warned ! If you get it on your skin even in the tiniest amount it stings like an ant bite. Definitely on par with the original Nitromors, as it used to be before legislation banned Methylene Choride for non-licence holders. |
23rd Sep 2016, 3:18 pm | #70 |
Heptode
Join Date: Aug 2016
Location: Dumfries, Scotland, UK.
Posts: 549
|
Re: Paint Stripping - "New" Nitromors is hopeless.
If its a metal cabinet large bucket water caustic soda
|
24th Sep 2016, 11:22 am | #71 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,193
|
Re: Paint Stripping - "New" Nitromors is hopeless.
Anything metal I just take to the powder coaters. They sand blast it getting the rust etc. out of every nook and cranny before applying the powder coating.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
25th Sep 2016, 8:00 pm | #72 |
Hexode
Join Date: Dec 2011
Location: Oswestry, Shropshire, UK.
Posts: 408
|
Re: Paint Stripping - "New" Nitromors is hopeless.
Langlow does the job that Nitromors used to do.
|