|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
11th Sep 2020, 9:24 pm | #1 |
Diode
Join Date: Sep 2020
Location: New Plymouth, New Zealand
Posts: 3
|
Are these domed rivets?
Can anyone tell if these are double sided domed rivets used on the RCA LMI 32216 amps to attach the octals on both ends of the amp.
There are photos here that show them. Or what they are and where I could buy them. Would they be like ones used in leather work? |
11th Sep 2020, 9:52 pm | #2 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,288
|
Re: Are these domed rivets?
I doubt they're double sided domed rivets, as rivet setts would be needed to fit them rather than a simple press.
Most likely hollow ended rivets similar to these:- https://www.ebay.co.uk/itm/5-32-4mm-...4AAOSw4-teN-KO
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |