UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Success Stories

Notices

Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 29th Jul 2019, 8:37 pm   #1
Whaam68
Hexode
 
Join Date: Feb 2007
Location: Luton, Bedfordshire, UK.
Posts: 454
Default Heathkit S-99

Yes another Heathkit. I’ve had this ecl86 amp based on the Williamson circuit (so the manual tells me) for over 10 years being one of the first vintage audio things I picked up. As purchased it was cosmetically nice but a non runner on one channel. This was eventually sorted by me with some help (I can't recall the exact problem) and the amp sounded good and soldiered on a few years before developing a lot of hum and generally sounding tired. It was then put in the loft well wrapped and boxed for a rest for a few years. When I picked up a set of Heathkit Cotswold speakers locally for £30 it was always in my mind to get the S-99 back in action so I could “party” like it’s 1965. This time I did a full chassis strip down, I’d already replaced some of the caps when I got it so did all the rest bar the ceramics. The resistors were all individually measured (only 3 carbon comps were in tolerance) and replacements fitted. The pots were cleaned and the rotting foam behind the Perspex faceplate (which had turned to dust) replaced with pieces of stiff grey and black card from a local art shop. I can’t see a way to remove the marks left by the foam's glue as the paint is on the rear of the Perspex. There is a lot of desoldering in this project and the early PCB needs care not to overheat it as the tracks will lift. De-bugging the voltages were finally all good and within the tolerance set out in the manual. My one mistake was a couple of bad joints on a couple of the RCA input terminal resistors which had caused one channel to keep crackling and again go low output. The paint is original as are the valves...one of the reasons I didn’t want to strip this down for the transformers as so many of these are. Now it’s done it sounds really nice and better than when I first got it, no hum on the phono input until the volume pot reaches 12 o clock then it’s quite low. I’ve run CD's through the aux input to test and it sounds excellent but needs attenuating so that’s the next job. I have a soft spot for these green era Heathkit although this model really packs in the circuitry in a very small space particularly the preamp section.
Attached Thumbnails
Click image for larger version

Name:	E5EC6058-9823-4108-AA18-70F32A7F167C.jpg
Views:	278
Size:	76.2 KB
ID:	187561   Click image for larger version

Name:	0ADC0F81-3A40-47C2-BA61-3FCD5B8B0904.jpg
Views:	261
Size:	101.6 KB
ID:	187562   Click image for larger version

Name:	B4F46BB5-7326-4658-A42C-0EB01605B0E9.jpg
Views:	238
Size:	105.2 KB
ID:	187563   Click image for larger version

Name:	ACE46B24-4087-4FCA-AA91-3AC847DF18FD.jpg
Views:	258
Size:	78.5 KB
ID:	187564   Click image for larger version

Name:	A84A1446-8414-435D-8C0A-3262119932EB.jpg
Views:	230
Size:	77.4 KB
ID:	187565  

Whaam68 is offline  
Old 29th Jul 2019, 8:42 pm   #2
Whaam68
Hexode
 
Join Date: Feb 2007
Location: Luton, Bedfordshire, UK.
Posts: 454
Default Re: Heathkit S-99

A few more pics.
Attached Thumbnails
Click image for larger version

Name:	D347AB48-42AC-4F3D-A7C1-64B31147FC62.jpg
Views:	193
Size:	142.9 KB
ID:	187567   Click image for larger version

Name:	6314859B-4545-4B51-B041-16FDCCB92C67.jpg
Views:	174
Size:	125.3 KB
ID:	187568   Click image for larger version

Name:	6927701D-B7B7-4FD7-926A-F60890BE783B.jpg
Views:	189
Size:	62.8 KB
ID:	187569   Click image for larger version

Name:	EED97159-B181-43E9-8490-D915BFB4131D.jpg
Views:	169
Size:	105.2 KB
ID:	187570  
Whaam68 is offline  
Old 30th Jul 2019, 8:07 am   #3
Trevor
Octode
 
Join Date: Aug 2006
Location: Stoke-on-Trent, Staffordshire, UK.
Posts: 1,082
Default Re: Heathkit S-99

Nice one Mike
regards Trev
Trevor is offline  
Old 30th Jul 2019, 12:27 pm   #4
mole42uk
Nonode
 
mole42uk's Avatar
 
Join Date: Aug 2010
Location: Resolfen, Wales; and Bristol, England
Posts: 2,588
Default Re: Heathkit S-99

Well done. I've a couple of those amplifiers, one has been my main amp for a few years now.
__________________
Richard

Index:
recursive loop: see recursive loop
mole42uk is online now  
Old 10th Aug 2019, 10:36 pm   #5
Phil G4SPZ
Dekatron
 
Phil G4SPZ's Avatar
 
Join Date: Apr 2005
Location: Bewdley, Worcestershire, UK.
Posts: 4,733
Default Re: Heathkit S-99

Congratulations, nice work. Quite a rare amp these days I guess. Do you think it was originally built professionally by Heathkit, or from a kit by a previous owner?
__________________
Phil

Optimist [n]: One who is not in possession of the full facts

Last edited by Phil G4SPZ; 10th Aug 2019 at 10:37 pm. Reason: Punctuation/clarity
Phil G4SPZ is offline  
Old 11th Aug 2019, 9:22 pm   #6
Whaam68
Hexode
 
Join Date: Feb 2007
Location: Luton, Bedfordshire, UK.
Posts: 454
Default Re: Heathkit S-99

Hi Phil
Definitely kit built as I got it with the manual many years ago complete with the original owners scribbles! It does sound really nice and fingers x’d since the last (hopefully final) rebuild it’s been 100% reliable and “quiet”. Since taking the pics I went back and swapped the polyester caps in the power amp section for paper in oil as it was sounding just a tad clinical. Changing those caps seems to have returned the tone I remember. I like listening to a lot of 60’s stuff and it just sounds right on this.
Best
Mike
Whaam68 is offline  
Old 11th Aug 2019, 9:28 pm   #7
Whaam68
Hexode
 
Join Date: Feb 2007
Location: Luton, Bedfordshire, UK.
Posts: 454
Default Re: Heathkit S-99

Hi Phil
Definitely kit built as I got it with the manual many years ago complete with the original owners scribbles! It does sound really nice and fingers x’d since the last (hopefully final) rebuild it’s been 100% reliable and “quiet”. Since taking the pics I went back and swapped the polyester caps in the power amp section for paper in oil as it was sounding just a tad clinical. Changing those caps seems to have returned the tone I remember. I like listening to a lot of 60’s stuff and it just sounds right on this.
Best
Mike
Whaam68 is offline  
Old 11th Aug 2019, 10:10 pm   #8
Phil G4SPZ
Dekatron
 
Phil G4SPZ's Avatar
 
Join Date: Apr 2005
Location: Bewdley, Worcestershire, UK.
Posts: 4,733
Default Re: Heathkit S-99

Quote:
Originally Posted by Whaam68 View Post
Definitely kit built... I went back and swapped the polyester caps in the power amp section for paper in oil as it was sounding just a tad clinical...
I doubt my ears could tell the difference! Do you know what type of capacitor was originally supplied for those positions?
__________________
Phil

Optimist [n]: One who is not in possession of the full facts
Phil G4SPZ is offline  
Old 12th Aug 2019, 6:24 am   #9
Whaam68
Hexode
 
Join Date: Feb 2007
Location: Luton, Bedfordshire, UK.
Posts: 454
Default Re: Heathkit S-99

Hunts mouldseal paper types....I replaced the 600v polyester I’d originally used in these positions with some Hunts NOS “military grade” metal cased paper caps ...I tested these at working voltage beforehand for capacitance and leakage. I’m not into all the voodoo but it did seem to subjectively improve the mid range, can’t really explain it.
Mike
Whaam68 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 9:11 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.