|
Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
11th Jul 2005, 5:03 pm | #1 |
Dekatron
Join Date: Nov 2003
Location: Near Leeds, West Yorkshire, UK
Posts: 4,609
|
Tool to remove inaccessible twisted tags
Case in question - the escutcheon on the Bush MB60 (and probably TR82 et al). It is held into the cabinet front with three tags that are twisted to retain them - two are buried in holes so they are inaccessible to pliers and the like.
Ideal tool to get to this is a split-pin with the ends cut off flush - about 2.5mm is OK. Spread it out slightly so the tag goes in the split.
__________________
Mike. |