Collaro Conquest service sheet - UK Vintage Radio Repair and Restoration Discussion Forum

Michael Maurice · 17th Oct 2009, 12:35 am

Firstly, Mods, pleae feel free to move this if its not in the right section.

There have been a number of requests for the service sheet / service manual for the Collaro Conquest automatic record changer so i've scanned it in, played around with the settings and put it into PDF form.

There are two parts, One deals with the 4 speed motor unit itself and this is parts 1 - 5

Michael Maurice · 17th Oct 2009, 12:39 am

Parts 6 - 8 deal with the changer mechanism itself, please note tht there are variations of the pick up arm. The one shown looks remarkably like the one in the later studio

Also the diagram of the 4 speed AC43 motor unit

Michael Maurice · 17th Oct 2009, 12:44 am

And last but by no means least, the diagrams of the changer mechanism

sidskid · 17th Oct 2009, 3:42 am

T

Thank you so much, I managed to put mine back together but something somewhere is not doing what its supposed to.

julie_m · 19th Oct 2009, 9:28 am

Thanks very much for this information!

I'm about to score a Collaro Conquest changer which sounds as though it's in need of some TLC (running slowly ..... which usually means solidified grease). All this will be immensely helpful, as I've never worked on anything more complicated than a BSR.

Michael Maurice · 19th Oct 2009, 4:40 pm

Quote:

Originally Posted by ajs_derby

All this will be immensely helpful, as I've never worked on anything more complicated than a BSR.

And the best of British

As you say probably solidified grease, but Collaros are unlike anyhing you've seen before!

Lubricate the motor this is quite simple, but the cam will need greasing as well. Do not try and dismantle the pick up arm clutch, it will end in tears! Floods of them.

Take photo's and notes before and as you dismantle. Don Bullock (remember him) said that the sight of one sent shivers down his spine!

At least they are plentiful unlike the later studio.

17th Oct 2009, 3:42 am	#4
sidskid Retired Dormant Member Join Date: Oct 2009 Location: Los Angeles, USA Posts: 3	Re: Collaro Conquest service sheet T Thank you so much, I managed to put mine back together but something somewhere is not doing what its supposed to.

19th Oct 2009, 9:28 am	#5
julie_m Dekatron Join Date: May 2008 Location: Derby, UK. Posts: 7,735	Re: Collaro Conquest service sheet Thanks very much for this information! I'm about to score a Collaro Conquest changer which sounds as though it's in need of some TLC (running slowly ..... which usually means solidified grease). All this will be immensely helpful, as I've never worked on anything more complicated than a BSR. __________________ If I have seen further than others, it is because I was standing on a pile of failed experiments.