UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Success Stories

Notices

Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 13th Jul 2005, 5:03 am   #1
oh2gtk
Retired Dormant Member
 
oh2gtk's Avatar
 
Join Date: Jul 2005
Location: Finland
Posts: 29
Default Aga Baltic 1951

http://furpile.com/Huutokaupat/AGA-B...mg_0011_tn.jpg
Klick on the image to get a big one (3.4Mb)

I got this radio in a pretty bad shape. It had almost all it's coils dangling as the owner had tried to "adjust" them. The smoothing capacitor had squirted it's electrolyte somewhere and the dial mechanism was redone using nylon thread....

Luckily the case was in fairly good condition and all essential parts were there.

The radio had obviously been used as an entertainer during some paintjob as it had paint drops all over. It was quite tedious to scrape those away with a scallpel. There is still some of them left but one needs more than ordinary goggles to see them.

This radio has very cumbersome dial mechanism. I tried at least 5 different configurations before I got it working like it should. It was not that the route would have been complex but this radio is very critical on the lengths of the threads involved. As I was not able to find steel thread as it should have been I used kevlar fishing line which proved to be a very good substitute.

http://furpile.com/Huutokaupat/AGA-B...kakansi_tn.jpg
Klick on the image to get a big one (352Kb)

The radio was manufactured in Sweden - or so the back cover claims.

The AGA company is today known for it's gases for welding etc. Actually this radio was manufactured by a Finnish company Helvar Oy and possibly only the AgA padge was glued on place by Aga. This truth is revealed by looking inside the radio..... the company name is on the loudspeaker magnet.

http://furpile.com/Huutokaupat/AGA-B...mg_0016_tn.jpg

Now, I know this radio is missing from this site's database. I would be more than pleased to see it there.

More images of this radio can be found at here
oh2gtk is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:00 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.