UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Repair and Restoration Services Wanted


Repair and Restoration Services Wanted If you need someone to repair or restore equipment for you please post your request here.

Closed Thread
Thread Tools
Old 7th Oct 2017, 11:41 pm   #1
Join Date: Sep 2017
Location: London, UK.
Posts: 21
Default Quad II. Needs checking over.


I have a Quad II single monoblock.
I have replaced all resistors and capacitors, also fitted an IEC mains plug, RCA plug and new speaker posts.

Have plugged it in. All valves light up, but No output.
I started with a 1 amp fuse.
Was fine until using multimeter near the rectifier. It blew and each replacement blew.

Before I Injure myself and the amp I would like a more capable technician
In the London area to look at it for me:

Kind regards,

Stanney2001 is offline  
Old 9th Oct 2017, 3:02 pm   #2
astral highway
astral highway's Avatar
Join Date: Nov 2006
Location: London, UK.
Posts: 2,750
Default Re: Quad II. Needs checking over.

Hi Andrew,

I'm in London and have fixed a few of these. Please PM me your location and I'll see if I can offer to help.
astral highway is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 11:26 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.