|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
14th Jan 2019, 10:16 pm | #1 |
Guest
Posts: n/a
|
STL file to print in 3D black and red caps for AVO.
So, here you are, for every Avo lovers the STL file to print the black and red caps.
They are very well done, note that the diameter of the red one is bigger than the black one, so there are 2 different STL. I wrote a few days ago to a Moderator, who kindly said to me that on the sticky thread "Avo model 8 FAQ" will be a link to this new thread with the files. These caps were made with love and care for the Avo Community people, not for selling them or to earn money, so please do not try to sell the caps or the files to others. I hope you enjoy them. Aitor Eneko. Last edited by Guest; 14th Jan 2019 at 10:26 pm. |
14th Jan 2019, 11:47 pm | #2 |
Pentode
Join Date: Dec 2018
Location: County Meath, Ireland
Posts: 242
|
Re: Stl to print in 3d black and red cap for avo
Nice one Aitor,
I will also upload my version which is slightly different, but its surprising how close we are. I have also created an Ohms zero knob if anyone needs one. And finally, the surfaces can be smoothed out by using acitone vapor. Good video here on how to do it simply. https://www.youtube.com/watch?v=6xFUNFG-UKE I have yet to do this but I'm going try it soon. Cheers Ray |