UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Reply
 
Thread Tools
Old 24th Mar 2019, 8:19 pm   #2061
Sinewave
Octode
 
Sinewave's Avatar
 
Join Date: May 2016
Location: Oxfordshire/Bucks borders, UK.
Posts: 1,365
Default Re: AVO Multimeter survey

A quick look by eye shows this Precision Avo to be working very accurately testing it with a Time Electronics calibrator.

It's a lovely instrument, never thought I'd own one due to how rare they are.
__________________
Avometer, vintage Fluke and Marconi collector.

At 144-146.00Mhz, keeping one wavelength apart.
Sinewave is offline   Reply With Quote
Old 25th Mar 2019, 8:21 am   #2062
Phil G4SPZ
Dekatron
 
Phil G4SPZ's Avatar
 
Join Date: Apr 2005
Location: Bewdley, Worcestershire, UK.
Posts: 4,420
Default Re: AVO Multimeter survey

The All-Wave Oscillator is missing its two cylindrical ‘dummy aerials’, normally stored in the two holes in the front panel. We have one of these oscillators at the Museum, with dummy aerials kindly donated by a Forum member.
__________________
Phil

“The place where optimism most flourishes is the lunatic asylum” - Henry Havelock Ellis
Phil G4SPZ is offline   Reply With Quote
Old 25th Mar 2019, 8:32 am   #2063
Sinewave
Octode
 
Sinewave's Avatar
 
Join Date: May 2016
Location: Oxfordshire/Bucks borders, UK.
Posts: 1,365
Default Re: AVO Multimeter survey

I found it inside the oscillator after hearing a rattling. It's also missing two valves. What I'll do is make another thread soon and show you the inside and you can tell me what else is missing as I've never seen inside one of these before.
__________________
Avometer, vintage Fluke and Marconi collector.

At 144-146.00Mhz, keeping one wavelength apart.
Sinewave is offline   Reply With Quote
Old 25th Mar 2019, 7:53 pm   #2064
pmmunro
Octode
 
Join Date: Jul 2004
Location: Dundee, UK.
Posts: 1,433
Default Re: AVO Multimeter survey

Another early Avometer for the survey: 13-range (DC) Avometer, Serial No. 4151, (Douglas Street production) has just sold at auction for £102.

I would estimate its date of manufacture to be around 1932/3. It is in very good cosmetic condition and appears to have the original, fixed, test leads.

From the price it would seem that at least two people were very keen to have it.

PMM.
pmmunro is offline   Reply With Quote
Old 25th Mar 2019, 7:59 pm   #2065
Sinewave
Octode
 
Sinewave's Avatar
 
Join Date: May 2016
Location: Oxfordshire/Bucks borders, UK.
Posts: 1,365
Default Re: AVO Multimeter survey

There are some very serious collectors about prepared to pay top price for these early Avos now.

I bought one of these some time ago for £20. Sadly, lost in the post.
__________________
Avometer, vintage Fluke and Marconi collector.

At 144-146.00Mhz, keeping one wavelength apart.
Sinewave is offline   Reply With Quote
Old 25th Mar 2019, 8:34 pm   #2066
AndyGilham
Pentode
 
Join Date: Oct 2016
Location: Dover, Kent, UK.
Posts: 231
Default Re: AVO Multimeter survey

Quote:
Originally Posted by pmmunro View Post
Another early Avometer for the survey: 13-range (DC) Avometer, Serial No. 4151, (Douglas Street production) has just sold at auction for £102.

I would estimate its date of manufacture to be around 1932/3. It is in very good cosmetic condition and appears to have the original, fixed, test leads.

From the price it would seem that at least two people were very keen to have it.

PMM.
That was me..... I bid £100 could not go any higher..... so I sadly missed out!?
Does look in great condition.... I hope another forum member got it!

Andy
AndyGilham is offline   Reply With Quote
Old 25th Mar 2019, 8:53 pm   #2067
The Philpott
Nonode
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 2,835
Default Re: AVO Multimeter survey

The 13-range you mention was in timewarp condition, remarkable. I didn't even consider bidding for it as DC only examples don't interest me as much as they do some people- so it will give someone else far more pleasure than it would me.

Dave
The Philpott is offline   Reply With Quote
Old 25th Mar 2019, 10:13 pm   #2068
Aitor Eneko
Heptode
 
Aitor Eneko's Avatar
 
Join Date: Dec 2014
Location: Gran Canaria, Canary Islands, Spain
Posts: 581
Default Re: AVO Multimeter survey

I did not buy it!
It is a very good example of Avo model 2, and i do not have one in my collection, but as i paid too much for my Avo model 4 i did not want to repeat my fault seeing it was going to be sold for a big amount.

Congratulations to the winner; hope to see it here soon!
Aitor Eneko is offline   Reply With Quote
Old 26th Mar 2019, 9:15 pm   #2069
Barnmead
Pentode
 
Barnmead's Avatar
 
Join Date: Dec 2002
Location: Norfolk, UK.
Posts: 155
Default Re: AVO Multimeter survey

Sinewave's acquisition led me to unearth my precision avometer and to look on web for serial numbers of others.
mine 441-567 (6625-99-104-5783)
others
247-466
272-566
589-967
709-670 (this is a Mk2 version)
__________________
Richard
Barnmead is offline   Reply With Quote
Old 27th Mar 2019, 5:45 pm   #2070
The Philpott
Nonode
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 2,835
Default Re: AVO Multimeter survey

I will email you shortly with some images of the peculiar Model 40(S) i am working on Richard.

Dave
The Philpott is offline   Reply With Quote
Old 28th Mar 2019, 7:45 pm   #2071
Electronpusher0
Octode
 
Join Date: Jun 2016
Location: Bognor Regis, West Sussex, UK.
Posts: 1,659
Default Re: AVO Multimeter survey

I have Model 40 to report in. Purchased at my local car boot for a fiver, pretty good nick, battery cover and the black probe present, no corrosion in the battery compartment.
Serial 5826-B-951

Its odd because it definitely says model 40 on the front and on the dial (no Mk2) and yet it has the two PF sockets at the top which would indicate a Mk2.

Peter
Electronpusher0 is offline   Reply With Quote
Old 28th Mar 2019, 8:02 pm   #2072
The Philpott
Nonode
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 2,835
Default Re: AVO Multimeter survey

PF sockets offered as an option on late Model 40 MkI, i believe.

Dave
The Philpott is offline   Reply With Quote
Old 28th Mar 2019, 9:45 pm   #2073
Aitor Eneko
Heptode
 
Aitor Eneko's Avatar
 
Join Date: Dec 2014
Location: Gran Canaria, Canary Islands, Spain
Posts: 581
Default Re: AVO Multimeter survey

You are right, i have an Avo 40, with PF and the interior is the same of a 40 mk2, there is a thread about it.
Aitor Eneko is offline   Reply With Quote
Old 28th Mar 2019, 11:42 pm   #2074
Granitehill
Tetrode
 
Join Date: Mar 2019
Location: York, North Yorkshire, UK.
Posts: 78
Default Re: AVO Multimeter survey

Another for the survey :

EA113 , serial 6523-1177.

I got it in faulty condition from the usual auction site. The fault turned out to be one smoked resistor in a (fortunately) easily accessed place. It's a lovely thing, and didn't cost silly money (it was very grubby when I got it, but it cleaned up nicely).

Used almost daily.
Granitehill is offline   Reply With Quote
Old 9th Apr 2019, 5:40 pm   #2075
sparkymike
Heptode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 767
Default Re: AVO Multimeter survey

I have just got hold of a Universal Avometer, model 48A in wooden box, complete with two shunts, multiplier and transformer in dusty/grubby condition,
but so far with the exception of the battery terminal that will have to be cleaned all seems to be good. There is a serial number on the dial plate that reads 1o656-143-R the is another plate on the lid of the box that give a different number. (possibly the meter has been replaced with another?)
I will post some photos after tea given time.
How is the battery connected in this model. ? A flying lead to the brass corner post and battery wedged up to the sprung brass fork ?
One of the wire wound pots is free but the other two seem to be seized.
Will investigate further. I would like to re-varnish the outside of the box. Can you still buy the old style brown varnish. I believe there should be some felt in the lid to protect the meter is that correct?
Mike.
sparkymike is offline   Reply With Quote
Old 9th Apr 2019, 7:43 pm   #2076
The Philpott
Nonode
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 2,835
Default Re: AVO Multimeter survey

I think there should be felt in the lid (there should certainly have been some around the sides of the base)

The original cell type had a screw terminal which engaged with the sprung fork, the other terminal was a wire en-bloc with the cell, which joined to the brass post at the corner of the battery compartment. This cell is obsolete so you are stuck with modifying the meter for a C or D cell (easily done)- but you might want to investigate the siezed pots before bothering! The meter might have been somewhere wet for a while causing the bakelite to swell. Completely siezed pots are uncommon - it may have had a hard life.

Dave
The Philpott is offline   Reply With Quote
Old 10th Apr 2019, 9:35 am   #2077
Superscope
Heptode
 
Join Date: May 2017
Location: St Austell, Cornwall, UK.
Posts: 651
Default Re: AVO Multimeter survey

Hi Mike,

I am assuming the Second Digit on the Serial Number is a 0 not an o ?

A Picture paints a Thousand Words.

The correct Battery for the 48A would have been a Rectangular/Square shape
approximately 30 x 30 x 80mm Equivalent to an Ever Ready R1662.

Although, being a Military Meter, the Batteries would have been
Military Branded items.
Somewhere on the Forum, there are Photo's of the original style Battery.

In the meantime, I have added some photos of the commercial Ever Ready Equivalent.

The Same Battery was used in the 36 Range Meters.

As Dave mentioned, the Battery is held onto the Positive Battery Terminal Fork by a Brass Nut.



As regards the Felt, yes there would have been Four small Squares of Felt, one on each side of the Meter compartment.
Two Pieces covering the Wooden Standouts along the sides and Two smaller pieces Top and Bottom.
It is likely you can still see where they were once Glued down.

There would also have been Two pieces on the Stands offs in the Lid to protect the meter,
and a Strip along the bottom to stop the Transformer and Multiplier rattling around.

Ian
Attached Thumbnails
Click image for larger version

Name:	P1070349.jpg
Views:	49
Size:	105.6 KB
ID:	181152   Click image for larger version

Name:	P1070350.jpg
Views:	46
Size:	55.2 KB
ID:	181153   Click image for larger version

Name:	P1070351.jpg
Views:	50
Size:	88.8 KB
ID:	181154   Click image for larger version

Name:	P1070353.jpg
Views:	50
Size:	117.2 KB
ID:	181155  
Superscope is offline   Reply With Quote
Old 10th Apr 2019, 10:57 am   #2078
sparkymike
Heptode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 767
Default Re: AVO Multimeter survey

Yes, typo on the serial number. 0 and not o.
Now checked the meter on AC volts and surprise, its ok !! It was probably in a damp garage for a while and the case had more than a matchbox full of what looked like insect eggs plus two grubs. I found two woodworm holes in the case, but no more so need to find the Rentokill tin and give it a good squirt. Both wooden case hinges were seized, but after a lot of heat and WD 40, they are fine. A small repair was needed on the Bakelite case for the transformer and that was not easy as both large wingnuts were solid and they need to come off to remove the case. Will the aid of a heat gun directed on wingnut but away from transformer case, I eventually removed them and case now repaired. There is a piece of Paxolin bridging the glass tube on the middle coil in the multiplier and that was bent and ready to drop off so new one will be made with the correct thread. (6BA probably).
Mike.
sparkymike is offline   Reply With Quote
Old 10th Apr 2019, 7:21 pm   #2079
The Philpott
Nonode
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 2,835
Default Re: AVO Multimeter survey

The one time i broke open a piece of wood and saw furniture beetle grubs, they were pale pink in colour. I use chemicals if i want to kill them, but the new way some people use is to bag up the offending article in plastic and put it in the freezer at minus 18 for a week or two.

'Solid Wingnuts, Batman!', as the boy wonder might have said.. It almost sounds like it has been living on the coast for a while, exactly the sort of thing that would be snapped up by stupids and upcycled- which makes it satisfying it's being restored.

Dave
The Philpott is offline   Reply With Quote
Old 10th Apr 2019, 7:59 pm   #2080
sparkymike
Heptode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 767
Default Re: AVO Multimeter survey

Perhaps I am stupid for restoring it !! Ha!
A few repairs to do to the case, but all minor, like a crack or split here and there. I use Titebond, the USA wood glue available easily over here. It blends nicely with the wood and does not leave a white line like PVA glues. I also have here the old pearl glue that you warm up in a pot and is the stuff that most old furniture was assembled with and that is a reversible fix as you can warm it up to release joints.
Getting back to main topic, I should post pictures shortly.
Mike.
sparkymike is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 6:39 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.