|
Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions. |
|
Thread Tools |
29th Oct 2021, 12:22 pm | #1 |
Heptode
Join Date: Oct 2019
Location: Täby, Sweden
Posts: 702
|
2.5kV power supply
This is available on a local site, and I'm sure postage would be possible to the UK. I've never seen one before - a 2.5kV power supply. Is that cat nip to a TV restorer?
2.5kV power supply |
29th Oct 2021, 12:45 pm | #2 |
Dekatron
Join Date: Sep 2007
Location: Oxfordshire, UK.
Posts: 4,311
|
Re: 2.5kv power supply
We used to use similar things at work for powering vacuum photodiodes. Our supplies weren't capable of delivering much current, but the dark current in the diodes was generally very small.
Cheers, GJ
__________________
http://www.ampregen.com |
29th Oct 2021, 4:54 pm | #3 |
Guest
Posts: n/a
|
Re: 2.5kV power supply
Is that 2.5 or 25 kV?
|
29th Oct 2021, 6:05 pm | #4 |
Nonode
Join Date: May 2016
Location: Cornwall, UK.
Posts: 2,333
|
Re: 2.5kV power supply
It looks European to me with a comma separator - doesn't that say "A2,5k" bottom right?
|
29th Oct 2021, 8:00 pm | #5 |
Dekatron
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 8,194
|
Re: 2.5kV power supply
Hi Folks, should be OK for the VCR97 type of set but too low for a TV22.
On the up side I suspect it has low current so will not kill you (but nasty bite) the way a mains derived type would Ed |