UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 23rd Jan 2021, 5:12 pm   #1
g4wim_tim
Pentode
 
Join Date: Nov 2018
Location: Freckleton, Lancashire, UK.
Posts: 232
Default Fair price for an Eddystone EB35 ?

Hi guys

there's an Eddystone EB35 for sale locally, looks to be in VGC complete with handbooks etc.
Seller says it works fine and is asking £140.

Is this a fair price ?

I was looking for something a little more vintage (valved) but feeling a little tempted by this EB35

Regards Tim
__________________
Building and tinkering for over 50 years, from 807's to digital amateur TV.
g4wim_tim is offline  
Old 23rd Jan 2021, 5:20 pm   #2
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,998
Default Re: Fair price for an Eddystone EB35 ?

Personally, I'd say it was worth no more than £60. The EB35 and its full-shortwave-coverage-and-a-BFO sibling the EC10 were honestly not really very good receivers.
G6Tanuki is offline  
Old 23rd Jan 2021, 5:29 pm   #3
g4wim_tim
Pentode
 
Join Date: Nov 2018
Location: Freckleton, Lancashire, UK.
Posts: 232
Default Re: Fair price for an Eddystone EB35 ?

thanks - that's largely in line with my thinking ie circa £70 tops.

I'll pass on it for now - maybe they'll drop the price to £50 ish as it looks like a house clearance going by other items they have for sale.
__________________
Building and tinkering for over 50 years, from 807's to digital amateur TV.
g4wim_tim is offline  
Old 23rd Jan 2021, 7:00 pm   #4
Guest
Guest
 
Posts: n/a
Default Re: Fair price for an Eddystone EB35 ?

Which version? I have the IC (integrated circuit) one. One little chip surrounded by lots of metal, it works well for FM, MW, LW, and casual SW listening. I would say the £60 mark is about right.
 
Old 23rd Jan 2021, 7:08 pm   #5
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,932
Default Re: Fair price for an Eddystone EB35 ?

It is worth what folks are willing to pay I guess. Though I have seen cheaper.

Of course if it is mint and boxed.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S
HamishBoxer is online now  
Old 23rd Jan 2021, 7:11 pm   #6
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,874
Default Re: Fair price for an Eddystone EB35 ?

EB35, EC10...They were just a fairly ordinary transistor radio sort of circuit dressed up in a rather cute box and with more bands worth of coils on the bandswitch.

As Tanuki said, they really don't work well on the shortwave bands and are average on long/medium.

Prices are jacked up far above their worth as a radio receiver because of the cuteness.

Unless you want it for a display shelf, I'd try to talk you out of it irrespective of price.

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now  
Old 23rd Jan 2021, 7:21 pm   #7
g4wim_tim
Pentode
 
Join Date: Nov 2018
Location: Freckleton, Lancashire, UK.
Posts: 232
Default Re: Fair price for an Eddystone EB35 ?

Thanks David - I'm going to pass on it. I suspect part my issue is lock down boredom and not having much on project wise at the moment.

Merlinmaxwell - don't know the version but not important now anyway.

73 Tim
__________________
Building and tinkering for over 50 years, from 807's to digital amateur TV.
g4wim_tim is offline  
Old 23rd Jan 2021, 8:38 pm   #8
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,874
Default Re: Fair price for an Eddystone EB35 ?

If you want a transistor radio with shortwave bands, have a look at the Hacker Helmsman. Again, not a comms receiver, but useful for tracing sources of interference or just having a wander round the shortwave broadcasters. Likely to be a good bit cheaper.

For a small receiver with better performance than you'd expect, try the Lowe receivers, but i find the user interface a bit tedious.

For ex-military with some cuteness, the Racal RA1217 gets you proper SSB crystal filters and a Wadley synthesis arrangement.

I think a fair amount of the demand for EB35/EC10 is from Eddystone collectors infected with the 'pokemon syndrome' (gotta gettem all)

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now  
Old 23rd Jan 2021, 8:42 pm   #9
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,998
Default Re: Fair price for an Eddystone EB35 ?

And equally if you want a low-end 'proper' communications-receiver that will stay on-frequency for resolving SSB, the Yaesu FRG7 is really worth considering.
G6Tanuki is offline  
Old 23rd Jan 2021, 9:28 pm   #10
g4wim_tim
Pentode
 
Join Date: Nov 2018
Location: Freckleton, Lancashire, UK.
Posts: 232
Default Re: Fair price for an Eddystone EB35 ?

Thanks for all the excellent advise. I'll keep my mind and eyes open !

73 Tim
__________________
Building and tinkering for over 50 years, from 807's to digital amateur TV.
g4wim_tim is offline  
Old 23rd Jan 2021, 11:34 pm   #11
majoconz
Heptode
 
majoconz's Avatar
 
Join Date: Jan 2008
Location: Ashhurst, Manawatu, New Zealand
Posts: 570
Default Re: Fair price for an Eddystone EB35 ?

G6Tanuki said
Quote:
the Yaesu FRG7 is really worth considering.
I'll give the frog a +1 as well - and it runs on batteries too!
__________________
Cheers - Martin ZL2MC
majoconz is offline  
Old 24th Jan 2021, 5:15 am   #12
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,874
Default Re: Fair price for an Eddystone EB35 ?

the Frog-7 was an excellent receiver for the price. It's a Japanese consumer version of the RA1217 and uses the Wadley scheme.

The downside is that many FRG7s seen nowadays have been mucked about with in attempts to 'improve' them. An old friend of mine even turned a couple into HF transceivers!

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now  
Old 24th Jan 2021, 3:40 pm   #13
Dave757
Heptode
 
Join Date: Apr 2009
Location: Scratby, Norfolk, UK.
Posts: 650
Default Re: Fair price for an Eddystone EB35 ?

Hi,

Having had several FRG-7s, I would entirely agree that in their price bracket
they were really excellent value for money. I also had 2 RA1217s, and apart
from the Wadley loop, I would say that was where any comparison ended!

The FRG7 did have one big advantage though ( apart from battery operation)
- it was a lot easier to find room for on the bench!

Kind regards
Dave
Dave757 is offline  
Old 24th Jan 2021, 6:47 pm   #14
Cobaltblue
Moderator
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,865
Default Re: Fair price for an Eddystone EB35 ?

As Tim has his valuations for the Eddystone time to close this one down.

Cheers

Mike T
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is online now  
Closed Thread




All times are GMT +1. The time now is 4:20 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.