|
Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions. |
|
Thread Tools |
20th May 2013, 4:36 pm | #1 |
Retired Dormant Member
Join Date: May 2013
Location: Hatfield Herts.
Posts: 2
|
405 Up Converter
Any one out there Know of an available 405 to 625 converter either a built unit / circuit or software that is available, as I have just restored a Sony 1/2" pre EIJ1 video recorder and it now will play 625 & 405 recordings and as I have 6 x 405 recordings that it is playing, I want to lift them up to 625 before the Oxide drops off the backing so that I have a copy that is playable.
|
20th May 2013, 6:18 pm | #2 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,817
|
Re: 405 Up Converter
See the previous thread in this section [405-625 14th May] and Vintage Ekco TV + Freeview in the Vintage TV section, particularly post 19*re a VCR. Hope that helps.
Dave W |
20th May 2013, 7:54 pm | #3 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,932
|
Re: 405 Up Converter
There used be Labgear units around a few years ago and they were old then and cheap. Don't think I still have mine.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S |