|
Other Vintage Household Electrical or Electromechanical Items For discussions about other vintage (over 25 years old) electrical and electromechanical household items. See the sticky thread for details. |
|
Thread Tools |
19th Jan 2015, 11:05 pm | #21 |
Hexode
Join Date: Oct 2011
Location: Portsmouth, Hampshire, UK.
Posts: 354
|
Re: Servant Bell Board.
I have recently acquired the box from one in the last couple of days while getting some firewood.
These articles should help me make the coils and flags to fit the box out again as the crowbar em had ruined the box and glass. Regards, Robin. |
16th Apr 2015, 8:32 pm | #22 |
Retired Dormant Member
Join Date: Apr 2015
Location: Cranleigh, Surrey, UK.
Posts: 1
|
Re: Servant Bell Board.
Hi - Love this thread and I'm restoring a system too. I know it's an old thread but do you remember where you got replacement flags from?
Thanks |
17th Apr 2015, 4:59 pm | #23 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,288
|
Re: Servant Bell Board.
I used Microsoft Paint software to create artwork for new striped flags and printed them on to stiff glossy card.
If that's what you need I'll try to find the artwork for you.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
17th Apr 2015, 8:25 pm | #24 |
Hexode
Join Date: Oct 2011
Location: Portsmouth, Hampshire, UK.
Posts: 354
|
Re: Servant Bell Board.
I would like to make the flags and I will have to rewind the coils
|
22nd Jun 2016, 9:22 pm | #25 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,288
|
Re: Servant Bell Board.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
3rd Jul 2017, 3:33 pm | #26 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,288
|
Re: Servant Bell Board.
I made a battery box to go with the bell board some time ago. It's a dummy as I plan to power the board from a wall wart.
Real discharged modern cells were used. They have all plastic cases, so there's little danger of the electrolyte leaking out. I printed new labels from a scan supplied by Dave Moll and covered them in heat shrink sleeving. The fabric covered wiring, which goes nowhere came, I think, from an old cooker. I have a 12 channel wireless control unit with 12 fobs which I intend using with this. Early experiments have run into problems though with sparks from the bell contacts latching the receiver on. A standard CR suppressor hasn't cured this.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
6th Jul 2017, 9:16 pm | #27 | |
Dekatron
Join Date: May 2010
Location: Greater Manchester, UK.
Posts: 18,711
|
Re: Servant Bell Board.
Quote:
A couple I know have just bought a house with an 8 flag annunciator in the kitchen, surprisingly it all seems to work after a fashion, despite the original cotton covered wiring showing no sign of any modern repairs. I have promised to restore it as a housewarming present. At the very least I will strip the layers of paint off the cabinet and apply varnish, and also strip the gong and see if what lies beneath can be polished. I also have memories of annunciators at family member's houses as a child, particularly those in Edinburgh, where they seemed to be common. My paternal grandparents lived in a Victorian flat in Forrest Road Edinburgh and had a mechanical system with three bells on springs in the kitchen, and even the latch on the front door could be lifted remotely with a heavy brass lever on the landing. |
|
7th Jul 2017, 10:22 am | #28 |
Dekatron
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,274
|
Re: Servant Bell Board.
I still have one from the Edinburgh flat I bought in 1972. It was installed in the kitchen which presumably was where the maid spent her time. Apart from the front door and stair door it proclaims two bedrooms, which it did have but also a dining room which I assume was the living room as it didn't have a dining room
|
7th Jul 2017, 7:20 pm | #29 | |
Guest
Posts: n/a
|
Re: Servant Bell Board.
Quote:
|
|
8th Jul 2017, 1:23 am | #30 | |
Nonode
Join Date: Jan 2010
Location: Edinburgh, UK.
Posts: 2,008
|
Re: Servant Bell Board.
Quote:
Al
__________________
I won't tell you how I discovered that. |
|
8th Jul 2017, 4:44 am | #31 |
Dekatron
Join Date: Jun 2015
Location: Biggin Hill, London, UK.
Posts: 5,208
|
Re: Servant Bell Board.
My late parents' house (4 bedroom, detached, SW London) was built in the 1930s, and it originally had bell pushes in all the rooms apart from the smallest bedroom, which was always said to be the maid's room. There was even a push in the bathroom, on the wall by the bath. When my parents bought it (1966) there was still the indicator box in the kitchen, over the door to the hall.
They threw it out. I never forgave them for doing that! |
8th Jul 2017, 8:24 am | #32 | |
Dekatron
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,274
|
Re: Servant Bell Board.
Quote:
Peter |
|
8th Jul 2017, 2:43 pm | #33 |
Dekatron
Join Date: May 2010
Location: Greater Manchester, UK.
Posts: 18,711
|
Re: Servant Bell Board.
That was my dad's bedroom! I slept in there once or twice when we visited my grandparents. I hadn't realised it was the servants recess, as it had long since been partitioned from the kitchen and made into an actual room albeit tiny.
The door to it was off the lounge I think. It was called the darkroom because it was. Actually I think there was a window high up in the partition with the kitchen, but grandpa was far too frugal to leave the kitchen light on. He really did greet us with "You'll have had yer tea". |