|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
23rd Nov 2023, 3:57 am | #1 |
Pentode
Join Date: May 2023
Location: Clovis, California, USA.
Posts: 194
|
Calculate for threading change gears
Program using a your browser to calculated the change gears needed for threading.
It was written by some else I add notes in Program for machinist. Dave |
23rd Nov 2023, 12:22 pm | #2 |
Octode
Join Date: Jul 2011
Location: Staffordshire Moorlands, UK.
Posts: 1,480
|
Re: Calculate for threading change gears
Thanks for this - how ever did we manage to do this stuff before computers? We must have been brainier back in those days!
Here's another excellent bit of software from a chap on the Boxford group that I subscribe to: https://ridethegeartrain.com/ Steve.
__________________
Those who lack imagination cannot imagine what is lacking... |
23rd Nov 2023, 12:53 pm | #3 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Calculate for threading change gears
Sorry, but detailed discussions about machine tools are off topic for the forums. Such discussions are better suited to Model Engineering forums.
Time to stop the spindle. Thread closed.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |