|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
21st Apr 2019, 12:16 am | #1 |
Octode
Join Date: Feb 2018
Location: Southampton, Hampshire, UK.
Posts: 1,063
|
Flat ribbon connector breakout board ?
I need to to use one of these cables with seven terminals to connnect an old BLDC motor to a controller. Short of splicing the cable and soldering regular wires on to them, I want to know if there is a dedicated breakout board made for this purpose. I can see that there are boards available for other cable types but not sure if there is one for this particular cable type ?
|
22nd Apr 2019, 10:43 am | #2 |
Octode
Join Date: Feb 2018
Location: Southampton, Hampshire, UK.
Posts: 1,063
|
Re: Flat ribbon connector breakout board ?
These appear to be the breakout boards I was looking for. The flat ribbon cable seems to be called FFC FPC and there are two pitches, 0.5 mm and 1 mm.
Mods please close this thread. Thanks. |