UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Closed Thread
 
Thread Tools
Old 19th Apr 2019, 2:19 pm   #1
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Nordmende Spectra Radio dial

I have just finished refurbishing a transistor Nordmende Spectra radio.

It is missing a couple of knobs but more importantly, missing one of the tuning dial pointers. The original would have been made of plastic, Anyone know how I could make another?
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline  
Old 19th Apr 2019, 3:23 pm   #2
ekjdm14
Banned
 
Join Date: Feb 2019
Location: Congleton, Cheshire, UK.
Posts: 609
Default Re: Nordmende Spectra Radio dial

Can't find a good close picture online but perhaps 3D printing would be of use if you have access?
ekjdm14 is offline  
Old 20th Apr 2019, 10:47 am   #3
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: Nordmende Spectra Radio dial

Sorted: I found a pointer from a Ferguson radiogram that was scrapped and used that.
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 3:19 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.