|
Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players Open-reel tape recorders, cassette recorders, 8-track players etc. |
|
Thread Tools |
21st May 2019, 3:17 pm | #1 |
Retired Dormant Member
Join Date: May 2019
Location: Peterborough, Cambridgeshire, UK.
Posts: 2
|
National RS 776S capstan drive
I have just acquired a National RS 776S tape recorder in which the capstan belt appears to be either missing or loose. Can anyone here give me a clue how I get to this particular item in the machine.
Currently, I have access to everything from the top. There appears to be no access from the bottom of the case, to reach below the transport area. Everything else appears to be good. Now in the process of cleaning and lubricating the transport, etc. I have a Service Manual which unfortunately, does not give any clues as to how to access the capstan drive belt Thanks in advance Gordi247 |
21st May 2019, 4:06 pm | #2 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: National RS 776S capstan drive
In the manufactures manual I'm looking at, disassembly instructions are given and shown in section N31-1 of the service manual.
Make sure it's unplugged from the mains supply first. Lawrence. |
22nd May 2019, 2:26 am | #3 |
Retired Dormant Member
Join Date: May 2019
Location: Peterborough, Cambridgeshire, UK.
Posts: 2
|
Re: National RS 776S capstan drive
Thank you Lawrence...Must admit, I didn't look very well at that particular part
|