UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
 
Thread Tools
Old 20th Aug 2018, 3:48 pm   #1
m_rawdin
Retired Dormant Member
 
Join Date: Aug 2018
Location: Newcastle Upon Tyne, Tyne & Wear, UK.
Posts: 24
Default Fitting drawer back into baseplate

How easy are the drawers to fit into a baseplate, is it literally as easy as taking off the blanking plate and sliding the drawer in along the runners? I can imagine it's a tight fit to get it in but once it's past the 2 channels designed to stop it coming out when you open it it should be easier?
m_rawdin is offline  
Old 20th Aug 2018, 4:18 pm   #2
ThePillenwerfer
Octode
 
ThePillenwerfer's Avatar
 
Join Date: Mar 2011
Location: Sheffield, South Yorkshire, UK.
Posts: 1,453
Default Re: Fitting drawer back into baseplate

Yes, they just slide in. Getting them out is more fiddly but there's nothing to putting them in.
ThePillenwerfer is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 8:53 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.