|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
29th Mar 2024, 2:01 pm | #1 |
Diode
Join Date: Mar 2024
Location: Beverly, East Yorkshire, UK.
Posts: 2
|
Dynatron HFC 209
Hi I recently bought a Dynatron HFC209 at an action. It wasn't a lot of money but was curious to listen to vinyl on a older machine.
I had to buy a stylus and wire the speakers up. But nothing came out my speakers. Investigating it more thoroughlyy my buttons which push in labelled Mute, VHS, Disc, TAPE etc don't push in and out, but I'm not sure if the Mute is permanently push in. So I need advice on freeing these buttons up, looks very complex job to replace these buttons. I would also be interested in a Manual / wiring drawing. Thank you Colin |
29th Mar 2024, 3:06 pm | #2 |
Octode
Join Date: Dec 2019
Location: Owston Ferry, North Lincolnshire, UK.
Posts: 1,704
|
Re: Dynatron HFC 209
Info available from this link https://www.service-data.com/product...9/10375/a17649 which is from the above link.
You might get the switch to free up with some switch cleaning lubricant. It's probably seized due to dried up grease. Dave
__________________
Quote "All is hyperthetical, until it isn't!" (President Laura Roslin, Battlestar Galactica) |