|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
31st Aug 2019, 7:05 pm | #1 |
Hexode
Join Date: Jun 2018
Location: Cambridge, Cambridgeshire, UK.
Posts: 262
|
McMichael 135 Tuning dial linkage
Can anyone advise on the interconnection between the drive cord drum and the dial gearing on this McMichael 135. There's a 3 spoke coupling and I assume that each of the 3 spokes should be riveted together. As you will see from the thumbnail below, the one on this set is not. Should it be?
Chris |
31st Aug 2019, 7:08 pm | #2 |
Hexode
Join Date: Jun 2018
Location: Cambridge, Cambridgeshire, UK.
Posts: 262
|
Re: McMichael 135 Tuning dial linkage
oOn closer inspection it is possible that the 3 spokes on the drum side just engage with the ones on the gear side. On this radio they are tending to ride over each other.
Chris |
31st Aug 2019, 7:11 pm | #3 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: McMichael 135 Tuning dial linkage
|
31st Aug 2019, 7:36 pm | #4 |
Hexode
Join Date: Jun 2018
Location: Cambridge, Cambridgeshire, UK.
Posts: 262
|
Re: McMichael 135 Tuning dial linkage
Thanks for the fantastic link Lawrence
Chris |