|
Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment |
|
Thread Tools |
2nd Jul 2015, 11:39 pm | #1 |
Heptode
Join Date: Jul 2007
Location: Flintshire, UK.
Posts: 707
|
Local dialling codes from Whitby (North Yorks)
I'm researching the local dialling codes for this part of the World. I know the local codes from Whitby (which was a 'Group Switching Centre' with the old STD code of 0947 - or 0WH7 in the early days of Subscriber Trunk Dialling). The codes I'm looking for are those to adjacent Group Switching Centres - such as Pickering, Scarborough and possibly Guisborough to the North . These local codes usually began with a '9' as STD didn't allow you to dial an STD code followed by a '9 ........ ' It was a way to prevent ways of making cheaper calls. A scan of the local dialling code page of an STD code book of the area /old dialling code card from any of the exchanges in the area should help and would be appreciated. Local dialling codes were 'moved' from the old STD codebooks produced fore ach exchange to the front of the telephone directory - whoops ! I mean 'The Phone Book' which was the old telephone directory renamed and revamped to include the local dialling codes. This started in mid-1984 and took over a year for all to appear.
Hoping someone can help Ian J |
4th Jul 2015, 9:32 am | #2 |
Octode
Join Date: Jan 2006
Location: Borough of Gateshead, UK.
Posts: 1,420
|
Re: Local dialling codes from Whitby (North Yorks)
I seem to recall many local codes began with a 9 followed by the number without an additional code? For example to call Stockton 6**** would be 0642 6**** outside the local area yet would be 9 6**** when calling from Sedgefield. I think it was the same when calling a Newcastle (0632) number from North Shields/Tynemouth (08945).
When Tyneside/Washington and Wearside changed to 091 7-figure numbers in the '80s, one had to dial 90 for a Sunderland number when phoning from Newcastle or Washington and vice versa despite the national code being the same. Thankfully this was phased out when Durham was added to the 091 area. Brian Last edited by Focus Diode; 4th Jul 2015 at 9:38 am. |
4th Jul 2015, 9:49 am | #3 |
Octode
Join Date: Jan 2013
Location: Barnsley, South Yorkshire, UK.
Posts: 1,517
|
Re: Local dialling codes from Whitby (North Yorks)
Yes 9 series numbers were common in the local codes as this from my area shows. Sorry Ian I've nothing further East in code booklets than Normanton exchange I fear although I've an ancient Hull directory somewhere.
|
6th Jul 2015, 10:35 am | #4 | |
Heptode
Join Date: Jul 2007
Location: Flintshire, UK.
Posts: 707
|
Re: Local dialling codes from Whitby (North Yorks)
Quote:
73 Wolviston 74 Normanby 75 Eston Grange 78 Hartburn Southbank lines became Eston Grange numbers in 1965. Then in STD days – these exchanges were moved into a separate change group – the STD code 0649 replacing the 7 in the local code. 73 Redcar (0649 3) - moved into Middesborough LNS as 0642 xxxxxx in 1979 74 Normanby - lines onto Eston Grange in 1962 740 Minerva 1969 to 1972 - lines moved onto Hartburn (0649 40) 741 Dovecot 1967 to 1972 - lines moved onto Stockton-on-Tees (0649 41) 742 Hartburn(Stockton-on-Tees) to 1972 - lines onto Stockton-on-Tees (0649 42) 743 Stokesley (0649 43) To Middlesborough LNS 0642 xxxxxx in 1971 745 Great Ayton (0649 5) To Middlesborough LNS 0642 xxxxxx by 1980 746 Hutton Rudby (0649 6) To LNS 0642 xxxxxx as Stokesley numbers in 1981 747 Hilton-in-Cleveland (0647 47) To LNS as Middlesborough numbers in 1972 75 Eston Grange (0649 5) To LNS 0642 xxxxxx by 1980 77 Wainstones (0649 7) 1961 to 1981 then lines moved into Stokesley. 78 Eaglescliff (0649 8) Moved into Middlesborough LNS with 6 digit numbers in 1970 Before moving into the LNS, all the above would dial '9' to reach Middlesborough, Stockton-on-Tees or Southbank. To reach ther exchanges they dialled 9 + the local code from Middlesborough. There were other local charge groups off Middlesborough such as the 0740 X group were the local code was 93X from Middlesborough – still charged as local calls to/from Middlesborough. 932 xxx Sedgefield (0740 2) to LNS 0740 xxxxx by /83 934 Wolviston (0740 4) to LNS by /83 935 xxx Ferryhill /(0740 5) to LNS 0740 xxxxx 1972 937 xxx Old Acres - relief to Sedgfield 21/12/1970 to 1976 then lines onto Sedgefield There could also be local routes direct off the GSC where the STD code was that of the GSC plus the local code i.e. Mold was 0352 whilst the exchanges dependant on Mold were - 80 Coed Talon 81 Holywell 82 Caerwys 83 Hendre 84 Pantymwyn 85 Llanferres 86 Northop 87 xxx Pontybodkin 88 xxx Halkyn 89 Winefride The STD codes for all the above were all 0352 XX - XX being the local code off Mold. Note there were odd exceptions to all he above but it was the main pattern. Hopefully it helps? There is much yet to be documented but it is finding the information which BT Archives haven't got - hence appeal for scans of old codecards/local code pages of old STD code books. If I can help you out with your local codes PM me. Most of these codes are being set up on CNet such that we can dial them with our old phones. Are you connected? PM me for more info as I administer the network - no line rental or call charges! Ian |
|
6th Jul 2015, 10:39 am | #5 | |
Heptode
Join Date: Jul 2007
Location: Flintshire, UK.
Posts: 707
|
Re: Local dialling codes from Whitby (North Yorks)
Quote:
Ian |
|
6th Jul 2015, 3:24 pm | #6 | |
Octode
Join Date: Aug 2005
Location: Saltburn-East, Cleveland, UK.
Posts: 1,786
|
Re: Local dialling codes from Whitby (North Yorks)
Quote:
Slightly OT for this thread but I am a CNet user and have to say that Ian has been very helpful both via e-mail and on voice calls over the CNet network when I was setting up my "exchange" and also when any problems occurred. I'm not that far from Whitby myself and might have extended relatives (or their friends) who may be able to assist with some of the codes, so I'll make some enquiries. Regards Andrew |
|
7th Jul 2015, 9:59 am | #7 |
Heptode
Join Date: Jul 2007
Location: Flintshire, UK.
Posts: 707
|
Re: Local dialling codes from Whitby (North Yorks)
Thanks for the kind words! Not that far off OT as all the known local codes off Whitby (0947) are set up on CNet including the little known codes to Aidensfield (88), Ashfordly (71) and Elsinby (72) .
As a matter of interest, the exchanges off Whitby were mainly smaller rural UAX13s with three digit numbers who dialed the usual '9' to reach Whitby - their Group Switching Centre through which all the calls to other exchanges were routed . However, in the early 1980's, these UAX13's were converted to five digit numbering and moved into a 'Linked Numbering Scheme' where there was no need to dial the '9' for Whitby followed by the local code for the other exchange. The first two digits of the five digit number routed the call out from Whitby (unless the call was for your own exchange). In this case the former local code was added to become part of the subs number - i.e. Grosmont whose local was 85 was added to the Grosmont exchange numbers which became 85XXX.At the same time the subs became 'Whitby' numbers rather than 'Grosmont' numbers. These racks were probably the last racks manufactured for Strowger exchanges. The last exchange using these racks was Grosmont - I'll leave you to guess who recovered these two racks? When I contacted BT about acquiring the racks, I was told someone would contact me. Then one evening I received a call to be told I could have them, the caller was enthusiastic about Strowger being preserved and chatted on for nearly an hour about exchanges. It was later on I discovered he was the Regional Director for the NE Region so I was told! Ian |