|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
12th Dec 2019, 12:38 am | #1 |
Nonode
Join Date: Dec 2012
Location: Kirk Michael, Isle of Man
Posts: 2,350
|
What is it?
Another What is it?
Well, I know WHAT it is, but not what EQUIPMENT it is for. A diode probe I assume, fattish grey body, shortpointed tip and very short grounding lead with croc clip. About 1M of lead, with a plug with typical "aluminium services" appearance. The connector has eight pins, similar to a B7G base with an eighth pin, plus a ninth one well offset from the centre. Pins much smaller cross section than those of B7G. Finally, a fairly wide location extending part around the pins Rotating knurled outer sheath. I think maybe an old Cossor 'scope or similar, but no real idea. If it can be identified, it will probably end up FOC in the appropriate section. |