UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Components and Circuits


Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets.

Thread Tools
Old 27th Jun 2024, 8:39 pm   #21
Join Date: Feb 2007
Location: Lynton, N. Devon, UK.
Posts: 7,166
Default Re: Hunts Capacitors

Originally Posted by smiler411 View Post
C13 should tie the top end of L3 to gnd as regards RF there should be no RF signal here...

I can't see how they could be used to feedback any signal for neutralisation
C13 and C7 form a capacitive voltage divider, which actually doesn't divide by very much! So will 'force' 89% of the RF voltage at the right-hand terminal of C7 (the top end of L6, which you'll notice has deliberately-added resistance before meeting with the 'quiet' HT) to appear on the non-earthy terminal of C13.
kalee20 is offline   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 6:02 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2024, Paul Stenning.