UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Television Standards Converters, Modulators etc


Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions.

Closed Thread
Thread Tools
Old 11th Mar 2019, 9:54 pm   #21
Vectamart's Avatar
Join Date: Feb 2007
Location: Ventnor, Isle of Wight, UK.
Posts: 137
Default Re: Modulator or Converter?

I have a device that I purchased from CPC that accepts an HDMI input, e.g. from a computer and converts it to composite video + audio (L&R) via RCA phono sockets. I have hooked this u[ to the phono input sockets on my DVD/VHS combi unit and fed its RF output to a distribution amplifier, thus enabling me to view the output of my PC on any TV in the house. BTW, all my TVs are CRT sets, mostly with 4:3 aspect ratio.
Vectamart is offline  
Old 11th Mar 2019, 11:50 pm   #22
19Seventy7's Avatar
Join Date: Jun 2018
Location: London, UK.
Posts: 860
Default Re: Modulator or Converter?

I don't know if you saw, but mine turned out to be audio, and not video. However it does work with composite video into the VCR, like you do too. What do you use to distribute the signal to other TVs? I've been looking for a practical way of doing so, but I've not had much luck

19Seventy7 is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 3:20 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.