|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
11th Nov 2018, 4:44 pm | #1 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Garrard 2025TC circlip
I hate to ask this question as i’ve done it many times on other players, but how do you remove the circlip from a Garrard 2025tc turntable? The mat is glued down and there is a smaller metal ring around the spindle hole which seems to be blocking access. I know one issue could be that i dont have the special tool and i just use a small flat head screwdriver to prise it out.
Thanks Edit: ive done it, i removed the mat and it came right off. Last edited by 19Seventy7; 11th Nov 2018 at 4:52 pm. |
11th Nov 2018, 4:47 pm | #2 |
Dekatron
Join Date: Aug 2006
Location: Madrid, Spain / Wirral, UK
Posts: 7,498
|
Re: Garrard 2025tc circlip
gently pry away the metal trim, then it's a case of separating the 'teeth' of the circlip slightly and lifting up. Note carefully/photograph which way round it goes before removal!
__________________
Regards, Ben. |
11th Nov 2018, 6:25 pm | #3 |
Nonode
Join Date: Jun 2014
Location: Bristol, UK.
Posts: 2,074
|
Re: Garrard 2025tc circlip
For future ref (so you don't have to unglue the mat) the decorative round plate in the centre has 3 little lugs which slot into a recess in the mat itself - remove the spindle and pull the plate sideways to reveal.
__________________
'....don't go mistaking Paradise for that home across the road!' (Bob Dylan) |
11th Nov 2018, 10:06 pm | #4 | |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Garrard 2025tc circlip
Quote:
Thanks |
|