![]() |
![]() |
![]() |
|
Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps. |
![]() |
|
Thread Tools |
![]() |
#1 |
Hexode
Join Date: Apr 2015
Location: Manchester, UK.
Posts: 424
|
![]()
Hi all. I am in need of a output transformer for my R107 as mine is faulty primary o/c if anyone has a spare one I would be very grateful I will meet all costs. Thanks regards Chris.
|
![]() |
![]() |
![]() |
#2 |
Nonode
Join Date: Mar 2008
Location: Virginia Water, Surrey, UK.
Posts: 2,088
|
![]()
I think this transformer has a couple of output windings, one centre-tapped, so it's pretty non-standard. And it's driven from an EBC33 so presumably has quite a high primary impedance (Ra is quoted as 15K). Its unlikely that one will just surface. I suggest you contact either Ed_Dinning or Murphymad (Mike Barker) on this forum to see if a re-wind can be done.
|
![]() |
![]() |
![]() |
#3 |
Hexode
Join Date: Apr 2015
Location: Manchester, UK.
Posts: 424
|
![]()
Hi Jeremy. Thanks for the reply I shall wait to see if one becomes available if not I will do what you suggest.
|
![]() |
![]() |
![]() |
#4 |
Octode
Join Date: Oct 2017
Location: Bristol, UK.
Posts: 1,298
|
![]()
Worth sending a request to VMARS if not already done. Jerry
|
![]() |
![]() |
![]() |
#5 |
Hexode
Join Date: Apr 2015
Location: Manchester, UK.
Posts: 424
|
![]()
Thanks for that Jerry.
|
![]() |
![]() |