|
Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
26th May 2020, 6:02 pm | #1 |
Hexode
Join Date: Nov 2009
Location: Cambridge, Cambridgeshire, UK.
Posts: 494
|
Replacement crt shroud for Cossor CDU 130
After spending much time agonising over how to make a new shroud for a Cossor oscilloscope, a friend said let me print you one.
The result wasnt perfect, a bit ruff, and bright green, but it can be painted. Image attached. Mark |
26th May 2020, 7:45 pm | #2 |
Octode
Join Date: Jan 2009
Location: Falmouth, Cornwall, UK.
Posts: 1,990
|
Re: Replacement crt shroud for Cossor CDU 130
Quite like the colour
__________________
Stephen _________"It`s only an old telly" ___ |
27th May 2020, 10:48 am | #3 |
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,535
|
Re: Replacement crt shroud for Cossor CDU 130
Does it fluoresce in a bit of UV? Could be a bit of fun to be had!
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |
1st Jun 2020, 7:59 pm | #4 |
Hexode
Join Date: Nov 2009
Location: Cambridge, Cambridgeshire, UK.
Posts: 494
|
Re: Replacement crt shroud for Cossor CDU 130
Cannot find my uv wand at the moment, but I suspect it probably glows a bit.
It is the same colour as the fizzy drinks bottles that glow at night seen laying on the side of the road..... |