UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Other Discussions > Forum Announcements and Comments

Notices

Forum Announcements and Comments Announcements about forum changes will be made in this section. All new threads here now require moderator approval.

Closed Thread
 
Thread Tools
Old 19th Dec 2017, 6:55 pm   #1
ColinTheAmpMan1
Octode
 
ColinTheAmpMan1's Avatar
 
Join Date: Jan 2012
Location: Wimbledon, London, UK.
Posts: 1,464
Default Posts not coming through.

Hi,
I have now tried to give some information on the thread "PMR Radio Repair?" in "Repair and Restoration Services Wanted" on two occasions. I can't see my replies at all. Is there some reason for this that I don't understand? I do hope that this post comes through.
Colin.
ColinTheAmpMan1 is offline  
Old 19th Dec 2017, 7:06 pm   #2
Cobaltblue
Moderator
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,823
Default Re: Posts not coming through.

I may be wrong but I think all posts in that area have to be moderated so there is a delay.

Cheers

Mike T
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is online now  
Old 19th Dec 2017, 7:22 pm   #3
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Posts not coming through.

Please see here:-

https://www.vintage-radio.net/forum/...d.php?t=101945

In particular:-

Quote:
DO NOT reply to these threads offering suggestions as to how the requester may be able to repair the item him/herself or speculating on the cause of the problems.
These settings were set up specifically so that members could find someone to repair equipment for them. If they want repair advice they can post in say "Vintage Military and Amateur Radio".
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is online now  
Old 19th Dec 2017, 7:27 pm   #4
ColinTheAmpMan1
Octode
 
ColinTheAmpMan1's Avatar
 
Join Date: Jan 2012
Location: Wimbledon, London, UK.
Posts: 1,464
Default Re: Posts not coming through.

Aha, Thanks Graham, I hadn't clocked that. I have sent a PM to the OP, but other than that and giving advice, I can't do more.
Colin.
ColinTheAmpMan1 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 8:02 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.