|
Other Vintage Household Electrical or Electromechanical Items For discussions about other vintage (over 25 years old) electrical and electromechanical household items. See the sticky thread for details. |
|
Thread Tools |
9th Feb 2018, 7:35 pm | #1 |
Hexode
Join Date: Jun 2003
Location: Burntwood, Staffordshire, UK or Kabaty in Warsaw Poland.
Posts: 439
|
Zanussi Nexus washing machine
This is a bit of a long shot and a question for someone who has one of these. The mechanical programmer on this machine seems to have slipped a few teeth so that the dial setting does not correspond to the wash program. If someone has one of these can they tell me where the end of cycle position is on the rotating dial as its not obvious on the dial. In 21 years of faultless operation of this washer I never noticed where it is.
If I know where the off position is then I could merely rotate the dial to the required wash program with reference to the new off position. |
9th Feb 2018, 9:15 pm | #2 |
Heptode
Join Date: Jan 2009
Location: West Lothian, UK.
Posts: 762
|
Re: Zanussi Nexus washing machine
Might be a common problem - I usually search the uk whitegoods forum for these devices e.g.
www.ukwhitegoods.co.uk/forumsphpbb3/zanussi-nexus-timer-t13031.html You might find someone there with a long memory...
__________________
George |
9th Feb 2018, 10:52 pm | #3 |
Hexode
Join Date: Jun 2003
Location: Burntwood, Staffordshire, UK or Kabaty in Warsaw Poland.
Posts: 439
|
Re: Zanussi Nexus washing machine
Thanks George for the information.
If I rotate the knob slowly every click seems to engage, if I move the knob quicker I can feel it missing the clicks as though the knob is loose. |