UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 3rd Aug 2006, 12:50 pm   #1
'LIVEWIRE?'
Rest in Peace
 
'LIVEWIRE?''s Avatar
 
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
Exclamation AUDION 'SILVER NIGHT' Valve Amplifiers

Few people may have come accross,or even heard of, these Valve Amplifiers(British Made)but I was asked if I could repair one recently, which suffered from mains hum pickup. The Power supply is a conventional Bridge Rectifier Circuit, using 4 x 1n4007 diodes, with a resistor/capacitor filter circuit using 4x 100uf or 220uf 400v Electrolytics and a 100R 7Watt Ceramic resistor(Circuits of the power supply and amplifier can be downloaded from www.audiokitmania.com) though variations exsist, and component values differ in some units. The problem was traced to faulty reservoir & smoothing capacitors, and, having replaced all four, not a trace of hum remained.
Incidentally these amplifiers use 2 x 300B Power Triodes(originally designed in the late 1920s) in a class A circuit, and produce about 7 watts RMS into a 4 Ohm load
'LIVEWIRE?' is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:45 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.