|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
2nd Feb 2015, 12:02 am | #41 |
Octode
Join Date: Jun 2013
Location: Huddersfield, West Yorkshire, UK.
Posts: 1,795
|
Re: Marconi 2022C - Stopped working below 62.5 MHz
Hi Guys.
I know it's a year on but I had a OM345 fail the other day in my 2022E. IC2 the amp for the 160 Mhz reference oscillator. I already had a mmic mar 6 module ready to go, and to get the 2022 working again, it was fitted. I know the current required is approx. 50 m/a but needs must. However reading through this thread I decided to have a go at my OM345. Scraping away the resin around the capacitor is quite difficult, and after a number of tries, I tinned the ends of the cap. As I had no 0603 3K9, I fitted a 0.125 leaded resistor, tested and result. Thanks, Jeremy for your hard work. Now I have a spare for the next time.
__________________
Should get out more. Regards Wendy G8BZY |