|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
23rd Aug 2016, 10:11 am | #1 |
Hexode
Join Date: Aug 2016
Location: Inverness, Highland, UK.
Posts: 300
|
DER/ Ferguson 8940
Managed to come across one of these really cheap, am I right in thinking a 3v29/30 belt kit will fit this? Not had it apart yet as i would like to have all bits ready for when I do. I have a wired remote for the 3v30 so will give that a try.
Cheers |
23rd Aug 2016, 1:57 pm | #2 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: DER/ Ferguson 8940
The 3V39 and the 8940 are both rebadges of the JVC HR-7200 so the mechanism is the same on these machines. The belt kit will fit it.
|
23rd Aug 2016, 3:39 pm | #3 |
Hexode
Join Date: Aug 2016
Location: Inverness, Highland, UK.
Posts: 300
|
Re: DER/ Ferguson 8940
That's good. Thanks
|
23rd Aug 2016, 8:10 pm | #4 |
Octode
Join Date: Aug 2005
Location: Saltburn-East, Cleveland, UK.
Posts: 1,786
|
Re: DER/ Ferguson 8940
Hi, The Baird/DER 8940 was a re-branded JVC HR7350 which was never produced as a Ferguson equivalent.
It's basically the linear stereo version (with Dolby) of the Ferguson 3V30/JVC HR7300 or Baird/DER 8930 so, as dj_fivos_sak already mentions, a 3V29/30 belt kit will be fine for this model. Regards Andrew |
23rd Aug 2016, 8:37 pm | #5 |
Hexode
Join Date: Aug 2016
Location: Inverness, Highland, UK.
Posts: 300
|
Re: DER/ Ferguson 8940
Top man, cheers
|