|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
29th May 2019, 3:08 pm | #1 |
Heptode
Join Date: Sep 2004
Location: Preston, Lancashire, UK.
Posts: 632
|
Ten Tec 6-2M transverter
Managed to pick up this transverter. Built from a kit.
On the whole it seems well designed, uses a discrete mixer and pin diode switching. It looks to have had a final transistor replaced and a couple of addintional leds cobbled On. Plenty ferrites in there. Need a suitably vintage prime mover now. Happy days |
29th May 2019, 4:38 pm | #2 |
Nonode
Join Date: Nov 2015
Location: Welwyn Garden City, Hertfordshire, UK.
Posts: 2,013
|
Re: Ten Tec 6-2M transverter
If those PA transistors ever need replacing you will have a hard job Steve.
What has been out there for last 10 years are almost all 100% fakes. Hope yours are good. |
4th Jun 2019, 3:08 pm | #3 |
Heptode
Join Date: Sep 2004
Location: Preston, Lancashire, UK.
Posts: 632
|
Re: Ten Tec 6-2M transverter
Tested and working. Input attenuator resistors are set for 5 watts so its putting 6 watts out on 50 with 1 watt input from the IC-260
https://youtu.be/aUchWYqVcb4 https://youtu.be/ELzPJ0y_EBg |