UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Reply
 
Thread Tools
Old 16th May 2018, 8:19 pm   #1
Chris 1155
Triode
 
Join Date: Dec 2017
Location: Reigate, Surrey, UK.
Posts: 21
Default TS 700G Kenwood/Trio.

Hi
I have just received an old TS 700G which is basically working.
It will not transmit because the 9 pin plug that fits in the VOX socket is missing.
Does anyone know the connections for the plug. I have a circuit and can make deductions but would like to be sure before trying it out.
Thanks in advance,
Chris G4BYZ
Chris 1155 is offline   Reply With Quote
Old 16th May 2018, 8:48 pm   #2
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 5,704
Default Re: TS 700G Kenwood/Trio.

Last 2 pins on r/hand-side joined together.Looking at the pins facing upwards . Pins 8 and 9 to be precise. Look at it like a valve base.
__________________
G8JET BVWS Member and V.M.A.R.S
HamishBoxer is offline   Reply With Quote
Old 17th May 2018, 10:08 am   #3
Chris 1155
Triode
 
Join Date: Dec 2017
Location: Reigate, Surrey, UK.
Posts: 21
Default Re: TS 700G Kenwood/Trio.

Thanks Hamish,
I thought that was the case but wanted to proceed with caution.
Chris G4BYZ
Chris 1155 is offline   Reply With Quote
Old 17th May 2018, 10:39 am   #4
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 5,704
Default Re: TS 700G Kenwood/Trio.

Quite correct,I like certainty and these are a great rig,owned mine here since new.

Also the Nag144 Linear,which has not been used for years.Time to put up my Tennamast again.
__________________
G8JET BVWS Member and V.M.A.R.S
HamishBoxer is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 1:45 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.