UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 24th Nov 2021, 2:45 pm   #1
carlos10
Pentode
 
carlos10's Avatar
 
Join Date: Apr 2007
Location: Sint-eloois-winkel 8880, Belgium.
Posts: 168
Default daiwa cn801hp calibration intructions

hi, looking for this instructions
meter shows to much rf power
regards carlos
carlos10 is offline  
Old 2nd Dec 2021, 1:04 pm   #2
carlos10
Pentode
 
carlos10's Avatar
 
Join Date: Apr 2007
Location: Sint-eloois-winkel 8880, Belgium.
Posts: 168
Default Re: daiwa cn801hp calibration intructions

solved, the alignment pots were labeled in very small print on pcb, overlooked that one,
working perfect now
carlos
carlos10 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:17 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.