|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
3rd Dec 2020, 5:56 pm | #1 |
Diode
Join Date: Dec 2020
Location: Strasbourg, France.
Posts: 1
|
Question about CW output FT101ZD
Hello,
I'm happy to have found this forum concerning the vintage radios. I use an old Yaesu FT101-ZD. I have question concerning the CW output. Could somebody help me just by doing a small test if you use a FT-101ZD as well ? If I set the CW output to 12W for example, PROC switch OFF, this power decreases about 3 W by activating the PROC to ON. I don't know if this behaviour is normal or not..... Please who could make this simple test and inform me ? Thank you very much!! Best regards. 73. Stephane. Last edited by sna68240; 3rd Dec 2020 at 6:03 pm. |
4th Dec 2020, 5:35 pm | #2 | |
Pentode
Join Date: May 2010
Location: Wick, Scotland, UK.
Posts: 227
|
Re: Question about CW output FT101ZD
The Processor is for use with a microphone, leave it off and adjust CW rf out put
cheers Quote:
|
|