UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Components and Circuits

Notices

Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets.

Closed Thread
 
Thread Tools
Old 15th Oct 2019, 5:14 pm   #1
Pete_kaye
Octode
 
Pete_kaye's Avatar
 
Join Date: Jun 2005
Location: Sheffield, South Yorkshire, UK.
Posts: 1,227
Default Piezo element

Why are there 3 wires to an extract from a smoke detector ? I want to use in a simple crystal set with small amp.
Pete_kaye is offline  
Old 15th Oct 2019, 5:52 pm   #2
Guest
Guest
 
Posts: n/a
Default Re: Piezo element

I don't understand your question. Any pictures?
 
Old 15th Oct 2019, 6:17 pm   #3
TonyDuell
Dekatron
 
Join Date: Jun 2015
Location: Biggin Hill, London, UK.
Posts: 5,190
Default Re: Piezo element

My guess is that this is one of those piezo buzzer 'disks'. Some types have 3 connections, a common wire to the metal disk (and thus one side of the piezo-stuff), a large 'drive' electrode on the other side and a smaller electrode on the same size as the large one that can be used for feedback in an oscillator circuit. I seem to recall you can make an beeper with one of these 3-terminal piezo sounder, a transistors and a small number of resistors and capacitors.

If you want to use one as a speaker then use the wire to the disk and the wire to the drive electrode. Either ignore the feedback electrode or connect it to the drive electrode.
TonyDuell is offline  
Old 16th Oct 2019, 6:17 pm   #4
Pete_kaye
Octode
 
Pete_kaye's Avatar
 
Join Date: Jun 2005
Location: Sheffield, South Yorkshire, UK.
Posts: 1,227
Default Re: Piezo element

This is what I meant. How do I know which is which , other than by experiment?
Attached Thumbnails
Click image for larger version

Name:	IMG_2413.JPG
Views:	128
Size:	113.4 KB
ID:	192024  
Pete_kaye is offline  
Old 16th Oct 2019, 6:30 pm   #5
SiriusHardware
Dekatron
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 11,484
Default Re: Piezo element

The colours of the existing wiring and markings where they connect to the detector PCB (which I don't see in your picture) is usually the best clue. More often than not the 'main' connections to the sounder will be red and black and the feedback wire some other 'neutral' colour like white, green or blue.

Have a look at this article, which also includes a standalone circuit to drive such an element.

https://electronics.stackexchange.co...a-piezo-buzzer
SiriusHardware is online now  
Old 16th Oct 2019, 6:36 pm   #6
TonyDuell
Dekatron
 
Join Date: Jun 2015
Location: Biggin Hill, London, UK.
Posts: 5,190
Default Re: Piezo element

I would think the metal disk is the common connection, the large annular metal part is the drive electrode and the little 'dot' in the middle is the feedback electrode.

I am not sure how you are going to make connections to it (soldering wires to the electodes can damage the piezo-stuff) but I'd try using the metal disk as one connection and the 2 electrodes joined together as the other one.
TonyDuell is offline  
Old 16th Oct 2019, 7:31 pm   #7
Diabolical Artificer
Dekatron
 
Diabolical Artificer's Avatar
 
Join Date: Jul 2009
Location: Sleaford, Lincs. UK.
Posts: 7,637
Default Re: Piezo element

I have a couple with wires on if you need one and several minature speakers if preferred for the cost of postage.

Andy.
__________________
Curiosity hasn't killed this cat...so far.
Diabolical Artificer is offline  
Old 22nd Oct 2019, 2:24 pm   #8
Pete_kaye
Octode
 
Pete_kaye's Avatar
 
Join Date: Jun 2005
Location: Sheffield, South Yorkshire, UK.
Posts: 1,227
Default Re: Piezo element

Thanks all of you . I have sorted myself out now.
Pete_kaye is offline  
Old 22nd Oct 2019, 3:17 pm   #9
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,800
Default Re: Piezo element

If you make an oscillator, or make a signal with software on a microprocessor and feed it to a piezo transducer, you run into the problem of making sure the drive frequency is on the resonance of the transducer for best output.

Using the transducer's resonance to control the frequency is an elegant way round this problem. All you need is an amplifier the small sense electrode drives the amplifier and the amplifier drives the big electrode. It goes unstable and ocillates bang on its own ideal frequency.

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:14 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.