UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 10th Apr 2021, 1:38 pm   #1
bionicmerlin
Hexode
 
bionicmerlin's Avatar
 
Join Date: May 2010
Location: Warminster, Wiltshire, UK.
Posts: 399
Default Valves for Bush TV

Looking for the following Valves for my Bush TV12 restoration.

EL42, PZ30
Also EF50 but not so important at this stage.
Ideally looking for New old stock.
Happy to pay the going rate .Andy
__________________
I bet that car doesn't have a suppressor.
bionicmerlin is offline  
Old 10th Apr 2021, 3:10 pm   #2
cathoderay57
Octode
 
Join Date: Oct 2017
Location: Bristol, UK.
Posts: 1,341
Default Re: Valves for Bush TV

Hi, no luck with EL42 but I have got good used tested examples of the other 2. Test results from a VCM163 are as follows:

PZ30 (Mullard) a'd=89% a"d=89%
EF50 (Mullard) Ia=13.5mA (10mA new);gm=7.5mA/v (7.2mA/v new)
You have a PM.
Cheers, Jerry
cathoderay57 is offline  
Old 10th Apr 2021, 5:41 pm   #3
60 oldjohn
Nonode
 
Join Date: Dec 2004
Location: East Yorkshire, UK.
Posts: 2,952
Default Re: Valves for Bush TV

I have just this morning received an order of NOS valves from David Thompson. I can PM you his details if needed. He offers a great service, very reasonable too.

John.
__________________
My favourite text message "I'll be there in five minutes, if not read again"
60 oldjohn is offline  
Old 10th Apr 2021, 10:16 pm   #4
bionicmerlin
Hexode
 
bionicmerlin's Avatar
 
Join Date: May 2010
Location: Warminster, Wiltshire, UK.
Posts: 399
Default Re: Valves for Bush TV

Thanks for everyone who messaged me.
All valves sorted
John . I will keep you in mind if I want his contact details for future valves.


Thread can be closed thanks Andy
__________________
I bet that car doesn't have a suppressor.
bionicmerlin is offline  
Closed Thread

Thread Tools



All times are GMT. The time now is 4:49 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.