|
Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment |
|
Thread Tools |
27th Feb 2011, 5:41 pm | #1 |
Retired Dormant Member
Join Date: Jun 2010
Location: Derby
Posts: 4
|
GPO Telephone No. 314F. Wiring request.
Hi people. I got to the stage where the phone would be able to ring and I could hear the dial tone but it would not recognize lifting of the handset. So I started again but a schematic that I drew was thrown away.
Anyone have any links on where to start from scratch? I have all the appropriate straps, resistors etc. I've got a blank canvas now, Help is really appreciated, I just want to use this phone now. Thanks. |
27th Feb 2011, 6:14 pm | #2 |
Dekatron
Join Date: Feb 2005
Location: West Cumbria (CA13), UK
Posts: 6,130
|
Re: GPO Telephone No. 314F. Wiring request.
Bob Freshwater's site is a good place to start for all (especially GPO) telephone matters, here is the page for the 314, including a link to the circuit diagram and instructions for wiring for UK plug and socket operation.
__________________
Mending is better than Ending (cf Brave New World by Aldous Huxley) |