|
Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment |
|
Thread Tools |
8th Dec 2018, 7:27 pm | #1 |
Retired Dormant Member
Join Date: Dec 2018
Location: Leek, Staffordshire, UK.
Posts: 1
|
W48 rewire help please
Hello all, I'm in the process of rewiring a German W48 phone for UK BT line and so far I have got the phone ringing and receiving incoming calls. My problem is that I cannot dial out. Sometimes I get nothing, sometimes I get number not recognised and sometimes I get there is a fault message. I have the phone wired with red and and white bt to terminals A and B and a 3.3k resistor soldered between the original green wire and left hand capacitor terminal if viewed from the rear. Everything else is stock. Dialer itself is in good serviceable condition and wired in correctly. Help greatly appreciated. Scott.
|
9th Dec 2018, 2:58 pm | #2 |
Heptode
Join Date: Jan 2008
Location: Hakadal, Norway
Posts: 643
|
Re: W48 rewire help please
Have you connected the blue wire?
If yes, you may have to switch red and white, or even cut a wire in the phone. It may also be the dial. dsk |