UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players

Notices

Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players Open-reel tape recorders, cassette recorders, 8-track players etc.

Reply
 
Thread Tools
Old 13th Mar 2019, 10:46 pm   #1
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Nearly silent output from vantone reel to reel machine

Recently picked up this reel to reel recorder from eBay:

https://picclick.co.uk/Retro-Vintage...613906739.html

I'm aware this is almost little more than a toy, but I wanted a small portable reel to reel to mess with on the cheap, so this seemed perfect. On arriving I cleaned it off and got it running pretty good, however I've found that both the internal speaker and headphones play the audio so quiet that it's barely perceptible, and it took me some intense listening to hear anything but static. However the audio does seem to be there, so I'm wondering, what could cause it to be this quiet? I cleaned off the heads and I checked it wasn't the tape, and on looking inside it I don't see any huge issue with any of the caps or components there. Is there something that would cause this to look for? Any help appreciated, thanks

Edit: there's also what seems to be a grounding wire(?) Connected to the headphone and mic jacks, the green and black cable visible in the photos. I'm using batteries so I doubt this is the issue but I'm not that well versed in hifi so might be part of the problem, I'm not sure
Cont3mplation is offline   Reply With Quote
Old 13th Mar 2019, 11:08 pm   #2
ben
Dekatron
 
ben's Avatar
 
Join Date: Aug 2006
Location: Madrid, Spain / Wirral, UK
Posts: 5,225
Default Re: Nearly silent output from vantone reel to reel machine

could be:
-dirty volume control pot
-dirty rec-pb mode switch contacts
-leaky output or driver transistor
-faulty capacitor in amp or preamp

I have had all these cause this problem before.
__________________
Regards,
Ben.
ben is offline   Reply With Quote
Old 14th Mar 2019, 11:50 am   #3
AC/HL
Moderator
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 6,904
Default Re: Nearly silent output from vantone reel to reel machine

That link is dead, is this the Vantone in question?
Attached Thumbnails
Click image for larger version

Name:	Vantone.jpg
Views:	79
Size:	44.7 KB
ID:	179901  
__________________
Bill, BVWS member
AC/HL is offline   Reply With Quote
Old 14th Mar 2019, 5:33 pm   #4
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

Yup that's the one, and am going to try to get into it and do some more cleaning and testing soon, will see if it could be any of those
Cont3mplation is offline   Reply With Quote
Old 14th Mar 2019, 7:11 pm   #5
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

Having looked inside I don't see any damaged capacitors (will link to imgur post asap) and I don't actually see any transistors anywhere within the machine which strikes me as odd. But will get photos up as maybe I'm missing something here
Cont3mplation is offline   Reply With Quote
Old 14th Mar 2019, 10:04 pm   #6
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

http://imgur.com/gallery/I0vCK1J
Some photos of the circuits and internals
Cont3mplation is offline   Reply With Quote
Old 14th Mar 2019, 11:18 pm   #7
jamesperrett
Heptode
 
Join Date: May 2007
Location: Alresford, Mid Hampshire, UK.
Posts: 954
Default Re: Nearly silent output from vantone reel to reel machine

I think I counted 5 transistors on the circuit board - they're the devices in metal cans. The head also looks a bit dirty - this would be enough to stop it recording and make any previously recorded tapes sound pretty dull.

What happens when you touch the head connections while the machine is playing a tape? Do you hear a buzz?
jamesperrett is offline   Reply With Quote
Old 16th Mar 2019, 8:43 pm   #8
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

Ah yeah, forgot for a minute their transistors aren't all encased in black, but when I try touching the head or the head pins while playing back there seems to be no reaction, or not one loud enough to be heard over the motor regardless of volume settings
Cont3mplation is offline   Reply With Quote
Old 16th Mar 2019, 8:43 pm   #9
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

I tried shorting the pins of the volume control while it played but that seemed to make no difference either, and for the record I'm pretty much brand new to reel to reel and vintage audio as a whole so apologies if I'm a bit useless when it comes to it
Cont3mplation is offline   Reply With Quote
Old 19th Mar 2019, 2:28 am   #10
Chris55000
Heptode
 
Join Date: Aug 2007
Location: Walsall Wood, Aldridge, Walsall, UK.
Posts: 569
Default Re: Nearly silent output from vantone reel to reel machine

Hi!

What fault finding equipment do you have?

You'll need a good quality digital multimeter and a small a.f. oscillator to diagnose this type of fault – you can get little kits/modules of a.f. sources for as little as 99p (free postage!) online!

You also need one of those little Chinese LCR T4 Testers for testing the passive components, as well.

Very low volume on this type of amplifier is commonly caused by degradation failure of the germanium amplifier transistors, particularly if somebody has accidentally reversed the polarity of the battery supply in the past – this will destroy them, but not always immediately, and power supply reversal can cause failure of a peculiar type where d.c. voltage readings test very close to normal but the transistors are incapable of correctly amplifying – I have personally had cases of this!

The first thing to do is to try and obtain the service–sheet or circuit diagram of the player's amplifier board – it's a standard transformer–coupled class B design about 250mW output with two additional transistors for tape head preamplification/frequency correction

If you can manage to read off the numbers on the metal transistor cans I'll give you a few typical voltage readings to expect!

Chris Williams
__________________
It's an enigma, that's what it is! This thing's not fixed because it doesn't want to be fixed!
Chris55000 is offline   Reply With Quote
Old 20th Mar 2019, 9:41 pm   #11
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

Hi, thanks for the detailed reply, I have a pretty decent digital multimeter but that's about the extent of it, if you'd be willing to link some of the others that'd be amazing, and will try to find the data sheets
Cont3mplation is offline   Reply With Quote
Old 20th Mar 2019, 9:45 pm   #12
Cont3mplation
Triode
 
Join Date: Feb 2019
Location: Lerwick, Shetland, UK.
Posts: 16
Default Re: Nearly silent output from vantone reel to reel machine

Have had a look and from what I can see this thread is essentially one of the only things ever posted online for this recorder, not a single diagram or manual or even reference to be found. Is there any generic data sheet that'd work for the purposes of testing? Thanks
Cont3mplation is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 10:01 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.